3Com Access Builder 7000 User Manual - Installing The Front Card

Installing The Module

2-5

Installing the Front Card

Figure 2-2   

Example Of Installing A Front Card

1

Locate the front slot in the AccessBuilder 7000 chassis equivalent to the 

rear slot in which you have already installed the rear card.

2

Insert the front card into the slot ensuring that it is centered along the 

guide rails.

3

Use the module’s handles to push the card gently but firmly home into 

the chassis and lock it into place.

4

Close and lock the chassis door.

To remove the card, unlatch the handles to free the card from the back 

plane and pull the front card free from the chassis using the handles.