3Com Baseline 2226-PWR Plus Quick Start Manual

Other manuals for Baseline 2226-PWR Plus: User Manual, Datasheet

Manual is about: Baseline

Page of 11

Download

Print this page

Bookmark us

The 3Com

Baseline Switch 2226-PWR Plus is a versatile,

easy-to-use 10/100 layer 2 switch with full Power over Ethernet

(PoE) capabilities. It is ideal for small-to-medium businesses that

want to:

Simplify convergence of data, voice, and wireless networks

today, using existing wiring infrastructure.

Prepare their networks for future expansion from existing

wired LAN to wireless and Voice over IP (VoIP).

The Switch can be used as any other 10/100 L2 switch. But unlike

other switches, its PoE support on all ports enables it to supply

power to IP phones and access points and, at the same time,

connect them to other wired network devices. This PoE capability

removes the need for additional power supplies for your IP

phones and access points.

The Switch has 24 shielded RJ-45, 10/100 Mbps auto-negotiating

ports and two 10/100/1000BASE-T ports. These ports operate in

conjunction with two Small Form Factor Pluggable (SFP)

transceiver slots on the front panel for easy, flexible connection to

fiber-based Gigabit media. All 10/100 Mbps ports are PoE-ready

and IEEE 802.3af compliant. Each port is capable of providing up

to 15.4 watts.

The 10/100 Mbps ports can automatically determine the speed

and duplex mode of the connected equipment and provide a

suitable switched connection. The 1000BASE-T ports also support

automatic 10/100/1000 Mbps speed detection. The 10/100 Mbps

connections on these 1000BASE-T ports operate in half-duplex or

full-duplex mode, while the 1000 Mbps connections operate in

full-duplex mode. The two SFP ports support fiber Gigabit

Ethernet shortwave (SX) and longwave (LX) SFP transceivers in any

combination. This offers you the flexibility of using SFP

transceivers to provide connectivity between the Switch and a

1000 Mbps core network. When an SFP port is in operation, the

corresponding 10/100/1000BASE-T port is disabled.

The Switch is suitable for office use where it can be free-standing

or rack-mounted (in a wiring closet or equipment room).

Figure 1 Connecting Devices to the Switch

NTRODUCTION

Baseline 10/100 switch

2 3 6

7 8

2 3 6

7 8

Endstations on switched

100 Mbps connections

Endstations on switched

100 Mbps connections

Baseline 10/100 switch

Baseline Switch 2226-PWR Plus

PoE-compliant devices

1000 Mbps link

10 or 100 Mbps link

PoE link

Server on switched

1000 Mbps

connection

Endstations

on switched

10 or 100 Mbps

connection

1000 Mbps copper

or fiber connection

to backbone or

server/workstation

3Com

Baseline Switch 2226-PWR Plus (3C16490)

Quick Start Guide

DUA1649-0AAA01

Baseline

Switch 2226 PW

R Plus

16 17

8 9

3C16490

1 2 3 4 5 6 7 Next › »

Summary of Baseline 2226-PWR Plus

Page 1
The 3com ® baseline switch 2226-pwr plus is a versatile, easy-to-use 10/100 layer 2 switch with full power over ethernet (poe) capabilities. It is ideal for small-to-medium businesses that want to: simplify convergence of data, voice, and wireless networks today, using existing wiring infrastructure...
Page 2: Hysical
The numbers in this diagram refer to numbered sections in the text. Front panel 1 24 rj-45 10/100 ports warning: these are shielded rj-45 data sockets. They cannot be used as standard traditional telephone sockets, or to connect the unit to a traditional pbx or public telephone network. Only rj-45 d...
Page 3
Priority-encoded, the switch reads the priority level and determines whether the packet should be directed through the normal or high priority channel. This feature is useful, for example, during periods of excessive network load, when one type of traffic may require priority over another. The switc...
Page 4: Ower
If the unit is to be part of a free-standing stack, apply the pads to each marked corner area on the underside of the unit. Place the unit on top of the lower unit, ensuring that the pads locate with the recesses of the lower unit. Rear panel 8 recovery button this button has no function on this swi...
Page 5: Nstallation
Checking the package contents the baseline switch 2226-pwr plus package includes the following items: one baseline switch 2226-pwr plus unit one power cord four standard height, self-adhesive rubber pads one mounting kit one cd-rom, which contains this quick start guide, the 3com discovery applicati...
Page 6: Ounting
Inserting an sfp transceiver to be recognized as valid, the sfp transceiver must have the following characteristics: 1000base-sx or 1000base-lx media type: ■ 1000base-sx sfp transceiver – use this transceiver to connect the switch directly to a multimode fiber-optic cable. ■ 1000base-lx sfp transcei...
Page 7: Afety
100base-tx or 1000base-t. 3com recommends using 2category 5e cables for 1000base-t operation. An sfp transceiver is connected, but the module active led for the port is off verify that: the fiber cable is in good condition. The sfp transceiver is correctly inserted. A 3com sfp transceiver is being u...
Page 8: L’
Warning: use of controls or adjustments of performance or procedures other than those specified herein may result in hazardous laser emissions. Veuillez lire à fond l'information de la sécurité suivante avant d'installer le baseline switch 2226-pwr plus. Avertissement: l’installation et la dépose de...
Page 9: Echnical
Related standards the baseline switch 2226-pwr plus has been designed to the following standards: environmental physical electrical power can also be provided by the switch through any of its 24 ethernet ports based on the ieee 802.3af power over ethernet (poe) specifications. For poe to work, the r...
Page 10: Egal
© 3com technologies, 2004. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without permission from 3com technologies. 3com technologies reserves the right to revi...
Page 11: Roducts
The baseline switch 2226-pwr plus is part of the extensive baseline range of 3com products. This range includes hubs, switches, power systems and other networking equipment, and is continually being developed. Contact your supplier for the latest product information and to order these products. Prod...