3Com TokenLink Velocity 3C319 Quick start
®
Q
UICK
S
TART
FOR
THE
T
OKEN
L
INK
V
ELOCITY
ISA 3C319 N
ETWORK
I
NTERFACE
C
ARD
Part Number 09-0965-001/August 1997
This Quick Start is for experienced token ring
network users. Perform the following steps to install
the 3Com
®
TokenLink
®
Velocity
™
network interface
card (NIC) (3C319):
1 Install the 3C319 NIC in an ISA or EISA slot in
your PC.
2 Connect a token ring cable to the NIC.
3 Power on your PC.
The 3C319 NIC will be automatically configured in
a Plug and Play (PnP) PC.
Table 1
shows the default
settings in PnP and non-PnP PCs.
Table 1
Default Configuration Settings
Option
Default Settings
in PCs with
PnP Support
Default Settings
in PCs without
PnP Support
Plug and Play
Enabled
Enabled
Configuration Mode
3Com
3Com
I/O Base Address
Set by PnP
A20h
Interrupt Request Level
Set by PnP
2(9)
Ring Speed
16 Mbps
16 Mbps
BIOS/MMIO Base Address
Set by PnP
CC000
RAM Page Size
16 K
16 K
Shared RAM Address Range
Set by PnP
D8000–DBFFF
Memory Mode
16-bit
16-bit
I/O Mode
16-bit
16-bit
IRQ Driver Type
Edge Triggered
Edge Triggered
AutoSwitch
Disabled
Disabled
Boot PROM
Disabled
Disabled
Zero Wait State
Enabled
Enabled