3D Systems Cube 3rd Generation Quick Start Manual - page 16

13

NOTE: The printer will begin to heat. Wait until 

the printer has finished heating and then follow 

the user prompts in the touchscreen menu.

12.  Insert the print jet (from the cartridge that will be mounted 

on the left side of the printer) into the left print jet opening 

on top of the printer. Rotate the print jet clockwise until the 

dots align.

NOTE: As you rotate the print jet, ensure the print 

jet tube is tucked under the top of the printer 

cover.

13.  Select the 

checkmark

 to continue.

14.  Mount the cartridge on the left side of the printer and 

select the 

checkmark

 to continue.