3D Systems CUBE Quick Start Manual - page 3

Congratulations on the purchase of your new Cube® 3D Printer! This Quick Start Guide has the use and 

safety information you need to get started. Welcome to the 3D creative revolution – let the possibilities 

begin!

If you have any questions, do not hesitate to reach us at cubifysupport@cubify.com. 

This Quick Start Guide will give you basic instructions on how to get your Cube

®

 3D Printer plugged in 

and printing so you can start making your own creations. 

For more detailed instructions, refer to the Cube

®

 User Guide located on your USB 

mass storage device.

CONTENTS

SAFETY ........................................................................................................................ 1

YOUR CUBE AT A GLANCE ........................................................................................ 2

UNPACK YOUR CUBE ................................................................................................. 3

      What’s Included .........................................................................................................................6

SETTING UP AND ACTIVATING YOUR CUBE ........................................................... 7

FINISHING YOUR CREATION ................................................................................... 23

      Removing your Creation from the Print Pad .........................................................................23

      Removing Supports and Rafts (If Required) .........................................................................23

MAINTENANCE .......................................................................................................... 24

      Print Pad Maintenance ............................................................................................................24

      Gap Verification .......................................................................................................................26

      Manual Gap Adjustment .........................................................................................................28