3D Systems ProJet 4500 Post Processing Manual - page 3
3D Systems, Inc.
3
INTRODUCTION
NOTE: For Material Safety Data Sheets, please reference: www .3dsystems .com/materials/visijet-c4-spectrum
Parts right out of the ProJet 4500 printer are ready to use and require no additional post-processing for strength . Depending on the
part’s application, additional processing steps can be performed to enhance color . This document provides processing instructions for
two methods to enhance color on ProJet 4500 parts .
The simplest way to enhance part color is to clear off all excess core powder . White powder on the surface makes the color appear dull .
Beyond removing excess core, dipping in solvents or waxes will make the color much more vibrant . Results from these methods can be
seen below .
1
Left – Standard Cleaning; Middle – IPA 99% Dip; Right – Paraffin Wax Dip