3D Systems ProJet 4500 Post Processing Manual - page 6
Other manuals for ProJet 4500:
User Manual, Installation Manual
Manual is about: 3D Professional Printer
of
13
3D Systems, Inc.
6
ADVANCED CLEANING
Brushing
1 . Externally from the printer, use a stiffer nylon brushes to further clean the part surfaces as seen in Figure 4 .
•
DO NOT
use metal bristle brushes to clean the part . Metal brushes are too aggressive which may dull the color at
the surface, result in a non-uniform color appearance and/or deteriorate the surface finish.
•
DO NOT
brush in the printer’s cleaning station .
Brushing with Nylon Brush
2. Be very careful when brushing fine features. Brush them extremely gently with the nylon brush. Features below 3mm
thickness risk breaking when brushed, do so cautiously if you choose. Support any fine features with your fingers while
brushing .
Standard Cleaning
Nylon Brush Cleaning