3D Systems ProX 500 Original Instructions Manual - page 21

3D Systems, Inc.

20

CHILLER REQUIREMENTS

The ProX 500 SLS system incorporates a chiller to dissipate heat energy from the system . The model recommended by 3D Systems 

is the SMC HRS024, Thermo-chiller, Compact Type, Single Phase, 200 to 230VAC, 50-60hz . For complete information regarding your 

particular chiller model, refer to the OEM documentation which accompanied your unit .

Caution: The electrical connector on the rear of the chiller will accept a standard 110 VAC power cord . The machine 

will operate at 110 VAC, however it WILL NOT operate as designed, and could damage the system .

7 

CHILLER COOLANT REQUIREMENTS

COMPONENT

REQUIREMENT

Water

Distilled Water

OptiShield

1 pint per gallon of distilled water

CHILLER ELECTRICAL REQUIREMENTS

COMPONENT

REQUIREMENT

Facility power

1

Single Phase, 200 to 230VAC, 50-60 Hz, 15A

1 . The single-phase chiller power source must be separate from the 3-phase process station power source .