3D Systems ProX 500 Original Instructions Manual - page 24
3D Systems, Inc.
23
SLS MATERIALS AND FILTERS
The materials and filters you receive in your shipment depend on your SLS application. All available materials and filters are listed
below .
SLS MATERIALS AND FILTERS
SLS materials
DuraForm
TM
ProX Plastic
Filters
Refer to the section,
Replaceable Filters on page 12
.
SHIPPING WEIGHTS AND DIMENSIONS
The shipments consist of several numbered pallets or crates of equipment and one crate of accessories . Check the count labels on the
pallets and crates to verify that your shipment is complete .
The weights and dimensions in the domestic shipment example below include the equipment plus the pallet or crate . Shipping
configurations may vary from this example.
NOTE: For “bare” equipment weights and dimensions (without pallets and crates included), see
System Component
Weights and Dimensions on page 25
.
ProX 500 SLS 3D PRINTER SYSTEM AND COMPONENTS
SHIPPING WEIGHTS AND DIMENSIONS, DOMESTIC EXAMPLE
Pallet or Crate Contents
Weight
1
Width
Depth/Length
Height
3D Printer Station
1928 kg
(4250 lb)
406 cm (81 in) 152 cm (60 in)
239 cm (94 in)
MQC System
TBD
TBD
TBD
TBD
Chiller
2
TBD
TBD
TBD
TBD
Dust Extractor
TBD
TBD
TBD
TBD
Bead blaster
2
91 kg (220 lb)
91 cm (36 in)
61 cm (24 in)
165 cm (65 in)
Accessories
TBD
TBD
TBD
TBD
Nitrogen Generator
136 kg (300 lb)
76 cm (30 in)
117 cm (46 in)
74 cm (29 in)
1 . Shipping weights are estimates .
2 . If ordered from 3D Systems