3D Systems ProX 800 Original Instructions Manual - page 5

3D Systems, Inc.

2

CONTROLLER - PART PREPARATION SOFTWARE

Included with the system is the 

3DManage™ 

(for part preparation)

and 

Print3D Pro

 software . These integrated modules 

provide part preparation and part printing functionality . Print3D Pro utilizes the ProX 800 controller computer, which is an 

integrated part of the ProX 800 . The 3DManage software is installed on a separate computer provided by the customer . 

MINIMUM COMPUTER REQUIREMENTS

The following are the 

minimum computer configuration requirements for the part preparation computer to run 3D Manage:

Processor

• 

Pentium 4 2 .4 GHz

Video Card

• 

OpenGL 1 .4

• 

128MB of graphics memory

• 

Native PCI express x 16 bus interface

• 

1280 x 1024 Resolution

RAM

• 

2 GB

2 

Manual Offload Cart

ProCure™ 750 UV Curing Chamber

The 

ProCure 750 UV Chamber 

is an optional accessory which provides 

essential final part curing to create a fully solidified part with stable 

mechanical properties and safe part handling . After printing on the 

SLA system, the part is washed and rinsed, then placed in this unit . 

Subjecting the part(s) to UV light for a period of time will fully solidify 

the part. After the part is removed from the unit, it is fully solidified and 

can be handled safely without gloves .

ProCure 750 UV Chamber

Manual Offload Cart

The 

manual offload cart

 is an optional accessory for all ProX 800 models . The 

offload cart allows you to easily remove the print pad when it is loaded with a 

large or heavy part and transport it to the finishing area where supports are 

removed and the part is cleaned before it is cured .

All parts must be offloaded with the manual offload cart to ensure optimal 

safety .