3D Systems ProX 800 User Manual - page 58

3D Systems, Inc.

58

Selecting a Print Job and Printing the Part

1.  A print job can be started either from the home status page or 

by selecting the 

Prints

 menu (1).

1

1

2

2.  If a file needs to be loaded, either insert a USB drive into the 

port below the touch screen (2) or transfer the file from the 

3D Manage

 application to the printer. Refer to the 3D Manage 

documentation for instructions.

3.  If a USB drive has been inserted, all 

 .bff files will pop up on the 

screen. Select the file you wish to print and press the 

Submit 

button. The file selected should be loaded in the Print Queue. 

ProX 800

4.  If the file is not in the top position, tap the file to highlight it, 

then tap the 

Jump to Top

   button to move the file to the top 

of the queue (3).

3

Removing Bubbles

If bubbles appear in the material, they must be removed prior to 

starting a print. Follow these steps to remove the bubbles:

1.  Navigate to the 

Tools

 menu.

2.  Select 

Remove Bubbles

 (1).

3.  Wait while an automated procedure manipulates the hardware to 

remove the bubbles.

Once the automated procedure has been completed, the printer is 

ready to print.