3DISON H700 User Manual - page 19
37
36
3DISON H700 User Manual V.1
3DISON H700 User Manual V.1
WiFi Camera
⑤
You can check an image in real time by clicking
the added camara to ‘VsCam app’.
NOTE :
●
The wireless connection may generate a
problem if the Internet router SSID (wireless
network name) is inputted with special
characters, Hangul and/or word spacing,
so you must check the SSID when connecting.
●
PIN may be changed after installation.
●
About two minutes of booting time is required after removal of LAN cable connected
to the camera.
●
When the wireless SSID is not set with PIN, simply click OK button without inputting
the PIN.
③
Enter Add Camera after execution of the pro-
gram to input UID number attached to a rear sur-
face of body, and input an initial PIN (personal iden-
tification number) 888888.
②
Install the IP Camera Super Client by executing
the CD enclosed in the product.
①
Connect the Internet router to WIFI Camera via
LAN cable. About one minute of booting time is
required.
2. Connecting to your computer
Annex2. Extra Features
(Laser Engraver / WiFi Camera / Embedded Battery)
WiFi Camera
Embedded Battery
④
Connect the camera to the program by double
clicking IP Camera on the right. Once you have
checked the connection, Click a button at right of
mouse to select [Camera Options].
Embeddedbatterypreventsemergentsituationwhichisunexpectedstoppingsupplyof
electricityduringprinting.Continuousprintingwithoutstoppingispossibleevenif
thepowercordispulledoffbymistakeorincaseofsuddenblackout.
⑤
Click [Set WIFI]>[Search Signals] on the option
screen. Select currently used wireless SSID > click
[Set] button > click [OK] button after inputting PIN.
Once the message saying to disconnect LAN Cable
appears, disconnect.
NOTE :
●
The wireless connection may generate a problem if the Internet router SSID (wireless net-
work name) is inputted with special characters, Hangul and/or word spacing, and therefore,
it is imperative that SSID be checked when connecting.
●
PIN may be changed after installation.
●
About two minutes of booting time is required after removal of LAN cable connected to the
camera.
●
When the wireless SSID is not set with PIN, simply click OK button without inputting the PIN.
OutputPower
MaximumRunTime
BatteryType
22.2Vdc/5200mAh
About40min.
Lithium
Annex2. Extra Features
(Laser Engraver / WiFi Camera / Embedded Battery)