3DR Solo User Manual - 2.4  Controller

8

Figure 2.3.2.1: Poweri

1 Slide to connect

2 Hold to power

ng Solo

2.4  Controller

The Solo Controller includes a pre-installed rechargeable lithium ion (Li-ion) battery.

2.4.1 

Charging

Charge the controller using the designated controller charger only; using a different charger can damage the

controller or cause a fire.

To charge the controller, connect the controller charger to the barrel jack on the side of the controller and to a

wall outlet. To check the battery level of the controller, press the power button. A fully charged controller lasts for

approximately 6 hours. Always check the controller’s battery level before you fly, and recharge when prompted by

the controller. The controller takes approximately three hours to charge to 100%.

Figure 2.4.1.1: Controller Charging