3DR Solo User Manual - page 75
Other manuals for Solo:
User Manual, User Manual, Installation Instructions Manual, Operation Manual
of
81
68
Figure 10.6.3: Motor Pod Disconnection
Connect the three cables from the arm to the new motor pod. Tuck the cables inside the arm and set the new pod
into place.
Figure 10.6.4: Motor Pod Connection
Turn over Solo and secure the new motor pod into place using the four provided screws. Do not reuse the screws
from the old Motor Pod. Finally, snap the LED cover
back into place.
Figure 10.6.5: Motor Pod and LED Cover Attachment
1
2