3i BSE-150 Installation Manual - page 4
of
8
Pag. 4
Manuale istruzioni BSE-150
ENGLISH
3.1.1 Remove front cover
3.1.2 Using the metal base, mark
on the wall the position of the fixing
holes. See below:
3.1.3 Insert the connection cable
that comes from the control panel.
3.1.4 Fix to the wall the metal base
of the sensor.
● Installation on column
3.2.1 Drill hole for the
cable on the top of the
column
Cable Hole
See fig. page 2 for terminal conn.
3.2.4 See below how to fix 2 units
to the same column.
3.1.5 Connect the cable to the
desire terminal blocks
3.2.3 Fix the metal base to the
Column as shown below.
3 - Installation procedure
● Wall mounting
3.2.2 Rimove the front cover