Installation and operating instructions for 3mdw201 full flow drinking water system homeowner: please retain for operation and future maintenance instructions. Instr8029 0512.Indd i 6/13/2012 9:17:59 am.
Instr8029 0512.Indd ii 6/13/2012 9:18:08 am.
Safety information explanation of signal word consequences read, understand, and follow all safety information contained in these instructions prior to in- stallation and use of the 3mdw201 full flow drinking water system. Retain these instructions for future reference. Intended use: the 3mdw201 ful...
Parts and materials required for 3mdw201 undersink installation (included): 1. Filter head assembly 2. Filter items required (not included): • adjustable wrench • cordless drill • phillips head screwdriver • razor knife or tube cutter • additional installation parts may be required optional kit: • 3...
1. Open faucet and turn off cold water supply to relieve pressure. 2. Select and mark a location under the sink that allows ac- cess for filter change. You will be connecting to the existing line with 3/8” tubing and various fittings not supplied with this filter assembly. 3. Using filter head assem...
Filter replacement instructions 1. Place towel under filter to collect any residual water during replacement filter change-out. 2. Grasp filter and turn to the left (counterclockwise) until filter comes to a complete stop (water automatically turns off). Water may leak momentarily from vent tube. Th...
Troubleshooting guide water leaks at push-in connections: push tubing in as far as it will go. If leaking continues, shut off water at the cold water supply valve and remove water line by pushing in on the connector collar while pulling the tubing away. Inspect tubing for cracks and scratches. If tu...
3m is a trademark of 3m company. © 2012 3m company. All rights reserved. Inst8029 0512 3m purifi cation inc. 400 research parkway meriden, ct 06450 855-3m-water (855-369-2837) www.3mwater.Com 8 instr8029 0512.Indd 6 6/13/2012 9:18:11 am.
