3M 6000 User Instructions - page 5
If the facepiece is to be used in air purifying mode (without using the 3M SA-1600 or SA-2600 breathing
tubes), the inhalation valves must be replaced in the facepiece before use.
Cartridge and Filter Selection and Approvals
Before using any of these products, the user must read the specific use for, use limitations and warning
information in the User Instructions and product packaging or call OH&ESD Technical Service at 1-800-243-
4630. In Canada, call Technical Service at 1-800-267-4414. Do not exceed maximum use concentrations
established by local regulatory agencies. Cartridges/filters are approved as assemblies for use with 3M™
Half Facepiece 6000 Series. For NIOSH approval, refer to approval label.
LIST OF PRODUCT
3M™ Half Facepieces
Number ****AAD
Description
6100 07024
Small
6200 07025
Medium
6300 07026
Large
****AAD part numbers are catalog numbers only. NIOSH approved as OH&ESD part numbers
3M™ Probed Half Facepiece Respirator (for quantitative fit testing only), includes 2091 P100 filters
Number ****AAD
Description
6100Q
Probed Respirator Assembly (Small)
6200Q
Probed Respirator Assembly (Medium)
6300Q
Probed Respirator Assembly (Large)
****AAD part numbers are catalog numbers only. NIOSH approved as OH&ESD part numbers
3M™ Half Facepieces Respirators (includes 2091 P100 filters)
Number ****AAD
Description
6191
P100 Particulate Respirator (Small)
6291
P100 Particulate Respirator (Medium)
6391
P100 Particulate Respirator (Large)
****AAD part numbers are catalog numbers only. NIOSH approved as OH&ESD part numbers
3M™ Bodyman and Brake Respirators
Number ****AAD
Description
07181
Small
07182
Medium
07183
Large
****AAD part numbers are catalog numbers only. NIOSH approved as OH&ESD part numbers
3M™ Accessories and Parts
5