Summary of 980
Page 1
1 user’s guide 3m ™ ionized air gun 980/980e.
Page 2
2 index section page 1. General description ...................................................................................... 3 2. Performance .................................................................................................. 3 3. Power requirements ................................
Page 3: All
3 1.0 general description the 3m ™ ionized air gun 980/980e provides efficient static charge neutralization by effectively removing particle contamination even on some of the most static-sensitive products. The ionized air gun 980 operates from 120vac power, and the ionized air gun 980e from 230vac ...
Page 4
4 4.0 air supply requirements for maximized operation, the 3m ™ ionized air gun 980 should be supplied with clean, dry air, or nitrogen. Please note that the failure to use clean, dry air or nitrogen may result in damage to the ionized air gun 980 that will not be covered by warranty. 5.0 installati...
Page 5
5 5.3 non-permanent mounting use 3m ™ dual lock fastener strips or pads to attach the console to a flat surface. 5.4 mounting onto an air supply when an air supply is close to the work area and fitted with a u.S.- standard industrial interchange quick coupling, you can attach the console to the air ...
Page 6
6 6.3 connect the male (air inlet) fitting on the console to the air supply. The console is designed for a u.S.-standard, industrial interchange quick coupling. You can attach the console directly to the air supply using the female quick coupler provided with the console, or attach it using a hose (...
Page 7: 7.5 Hold The 3M
7 7.5 hold the 3m ™ ionized air gun 980 approximately 6 inches (15 cm) from the surface you want to discharge and blow off. Aim the ionized air gun 980 and press the trigger to blow ionized air. The green led on the back of the ionized air gun 980 lights up while you press the trigger, indicating th...
Page 8
8 8.2 replacing the air filter 3m recommends changing the filter every three months or when it begins to look dirty. Replacement filters are available from 3m (see table 1). 8.21 hold down the filter release button on the side of the console. 8.22 remove the hose and filter from the console by pulli...
Page 9
9 8.35 align the blunt prongs of the emitters with the holes in the 3m ™ ionized air gun 980 barrel and set the clip into place. 8.36 press the clip all the way in using the tip of a screwdriver. It should fit snugly between the raised rim of the barrel and the raised rim of the air nozzle. If the c...
Page 10: 9.1 General
10 8.4 replacement & optional parts table 1 lists the replacement parts and optional parts available for the 3m ™ ionized air gun 980/980e. 8.5 testing for proper operation 8.51 to make sure that your 3m ™ ionized air gun 980 is working properly, check the balance and discharge levels. The performan...
Page 11: 9.3 Console
11 9.3 console construction static-dissipative polycarbonate input power 24vac, power indicator green led air/gas input 20-65 psi (1.4 - 4.5 bars), clean dry air or nitrogen for safety purposes, this unit has been tested at 1.5 times these air pressures. Air/gas connection 1/4" (0.64 cm) male us-ind...
Page 12: Weee Statement
12 regulatory information this symbol, per “marking for the control of pollution caused by electronic information products, sj/t11364-2006,” means that the product or part does not contain any substances in excess of the maximum concentration values as per “electronic industry standard of the people...
Page 13
3 electronics materials solutions division static control products 926 jr industrial drive sanford, nc 27332-9733 toll-free: 866-722-3736 international: 919-718-0000 email: 3mstaticinfo@mmm.Com www.3mstatic.Com please recycle. Printed in usa. © 3m 2014. All rights reserved. 78-9102-1498-6 jha import...
Page 14: Mouser Electronics
Mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: 3m : 980e-x.