3M 980 User Manual - page 5
5
5.3 Non-permanent Mounting
Use 3M
™
Dual Lock Fastener Strips or pads to attach the console to a flat
surface.
5.4 Mounting onto an Air Supply
When an air supply is close to the work area and fitted with a U.S.- standard
industrial interchange quick coupling, you can attach the console to the air
supply fitting directly using the female quick coupler provided with the console.
If a U.S.-standard industrial interchange quick change is not available on the
air supply, be sure to use a suitable interconnect between the air supply and the
console, including a prefilter as defined in Section 4.0.
6.0 Assembling the Components
6.1 Insert the larger end of the filter cartridge into
the fitting at the end of the flexible air hose.
Push the filter gently until it is firmly seated
and the metal Filter Release Tab pops out,
locking the filter into place. See Figure 2.
6.2 Connect the hose and filter to the console.
First, push the Filter Release Button (Figure
3) in all the way. Then, push the fitting
containing the filter all the way into the
opening in the console until it latches with
a click. The fitting fits only in the correct
orientation. The small plastic fitting on the
end of the filter must align with the metal
guide coupling in the console. You may have
to wiggle the filter slightly while inserting it.
See Figure 3.
CAUTION
Protect the hose from sharp objects, abrasion, and high temperatures. Do not pull or pinch the hose
while assembling the components.
Figure 2
Figure 3