3M ChassisTouch 450 Installation Manual - Important Safety Information
3M Touch Systems Proprietary Information
i
Important safety information
Intended use
The ChassisTouch
TM
450 monitor is intended to provide touch screen functions
when connected to a host computer in an industrial setting. The ChassisTouch 450
monitor is not intended for use in hazardous locations.
The ChassisTouch 450 monitor is a component. After it is installed, the whole
system of which it is a part must be inspected to confirm seal ratings and
compliance with all local electrical codes.
Safety notices
Product safety information
DANGER
To reduce the risks associated with fire and explosion which, if not avoided, will cause death or
serious injury and/or property damage:
!
Do not install or use this product in a hazardous location.
WARNING
To reduce the risks associated with electrical shock, fire, or explosion which, if not avoided,
could result in death or serious injury and/or property damage:
!
Follow all product instructions.
!
Performance of all procedures described in this document should be by trained personnel.
!
Any servicing or other procedures not described in this manual are to be performed only by qualified
personnel.
!
Read and understand all safety information before installing and using the monitor.
!
Engineer the installation of the monitor to take into account the operating environment (e.g., shock/
vibration and/or thermal factors).
!
Properly install the monitor with a NEMA 4X gasket that is clean, undamaged, and effective.
!
Do not modify the monitor.
!
Use only 3M components or 3M-approved components for repairs.
!
If a replacement part is needed, contact 3M Touch Systems.
!
Provide a clean, reliable ground.
!
Use locking devices on connectors.
!
To ensure compliance with electrical codes and safe operation of the monitor, have a licensed
journeyman electrician familiar with local codes perform all wiring and installation tasks.
WARNING
To reduce the risks associated with electrical shock or fire which, if not avoided, could result in
death or serious injury and/or property damage:
!
If the monitor is mounted using a NEMA 4X panel gasket, install the unit in a Listed (UL) enclosure.
!
If the monitor will be used in corrosive environments, it is the responsibility of the user to test and
evaluate the unit in those environments. The monitor, as shipped, has not been evaluated for use in
excessively corrosive environments.