3M MINI RANDOM ORBITAL SANDER Instruction Manual - page 2
3M™ 1 1/4 in Mini Random Orbital Sander
1
Revision 040610
3M™ 1 1/4 in Mini Random Orbital Sander
2
Revision 040610
Parts Page
CAUTION
To reduce the risks associated with skin abrasion, burns, cuts, or entrapment:
• Keep hands, hair, and clothing away from the rotating part of the tool.
• Wear suitable protective gloves while operating tool.
• Do not touch the rotating parts during operation for any reason.
• Do not force tool or use excessive force when using tool.
To reduce the risks associated with whipping or hazardous pressure-rupture:
• Ensure supply hose is oil resistant and is properly rated for required working pressure.
• Do not use tools with loose or damaged air hoses or fittings.
• Be aware that incorrectly installed hoses and fittings might unexpectedly come loose at any time and create a whipping/impact
hazard.
To reduce the risks associated with fly off of abrasive product or parts:
• Use care in attaching abrasive product and disc pad; following the instructions to ensure that they are securely attached to the tool
before use.
• Never free spin the tool or otherwise allow it to be started unintentionally.
• Never point this product in the direction of yourself or another person, or start tool unintentionally.
• Never over-tighten accessory fasteners.
To reduce the risks associated with vibration:
• If any physical hand/wrist discomfort is experienced, work should be stopped promptly to seek medical attention. Hand, wrist and
arm injury may result from repetitive work, motion and overexposure to vibration.
To reduce the risks associated with loud noise:
• Always wear hearing protection while operating this tool. Follow your employer’s safety policy or local/national standards for
personal protective equipment requirements.
To reduce the risks associated with fire or explosion:
• Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. The abrasives are
able to create sparks when working material, resulting in the ignition of the flammable dust or fumes.
• Refer to MSDS of material being worked as to potential for creating fire or explosion hazard.
To reduce the risks associated with hazardous dust ingestion or eye/skin exposure:
• Use appropriate respiratory and skin protection, or local exhaust as stated in the MSDS of the material being worked on.
To reduce the risks associated with hazardous voltage:
• Do not allow this tool to come into contact with electrical power sources as the tool is not insulated against electrical shock.
WARNING
NOTES
DWG SCALE 1 : 3
1.
5
4
3
2
1
7
6
8
9
10
12
13
14
15
16
11
17
18
20
19
21
39
25
24
23
22
26
27
28
29
3M 1 1/4 PAD
30
31
32
33
34
35
36
37
38
REVISION RECORD
R
DESCRIPTION / DATE
A
RELEASED FOR PRODUCTION
RED 04/22/08 PWH 04/22/08
B
ITEM31 XPA0380 WAS XPA0014 PER
CUSTOMER REQUEST.
RED 04/28/08 PWH 04/28/08
C
ITEM 41 WAS NOT ON
RED 05/27/08 PWH 05/27/08
D
ITEM 22 XPA1979 WAS XPA0584
RED 06/30/08 PWH 06/30/08
E
-BOM P/N; XPA1979 INTERNAL MUFFLER
ASSY WAS NOT REMOVED
-BOM P/N; XPA0068 MUFFLER INSERT
WAS NOT REMOVED
-BOM P/N; XPA0166 MUFFLER HIOUSING
WAS NOT REMOVED
-BOM ITEMS AFTER ITEM 21 WERE NOT
RENUMBERED
-BOM ITEM 39, XPA1991 MUFFLER ASSY
WAS NOT ON
RED 07/22/08 PWH 07/22/08
ITEM
TORQUE SETTING
Nm (in.-lbs.)
12
6.2 - 7.3 (55 - 65)
24
1.8 - 2.3 (16 - 20)
25
6.8 - 8.1 (60 - 72)
IT
P/N
DESCRIPTION
QTY
1
XPA0040 EXTERNAL RETAINING RING
1
2
XPA0021 10 X 26 X 8 BEARING - 2 SHIELDS
1
3
XPB0017 REAR ENDPLATE
1
4
XPA0005 CYLINDER ASSEMBLY
1
5
XPA0042 5 mm x 2.0 mm O-RING
1
6
XPB0005 MACHINED ROTOR
1
7
XPA0010 VANE
5
8
XPA0041 3 mm x 13 mm WOODRUFF KEY
1
9
XPB0016 FRONT ENDPLATE
1
10
XPA0019 12 X 28 X 8 BEARING - 2 SHIELDS
1
11
XPA0045 39.4 mm x 3.1 mm O-RING
1
12
XPA0001 LOCK RING
1
13
XPB0405 MINI 8,000 RPM X 3/16 ORBIT, SHAFT BALANCER
1
14
XPA0122 FILTER
1
15
XPA0121 DUCKBILL CHECK VALVE
1
16
XPA0120 VALVE RETAINER
1
17
XPA1873 LEVER FOR 3M 12,000 RPM ROS 5 mm (3/16 in) ORBIT
1
18
XPB0321 GRIP 2 3/4 in. PMS RED 485
1
18
XPB0320 GRIP 2.5 in PMS RED 485
OPT
18
XPB0322 GRIP 3 in. PMS RED 485
OPT
19
XPA1872 MINI HOUSING FOR 3M, MACHINED
1
20
XPA0031 LEVER SPRING PIN
1
21
XPA0015 VALVE SLEEVE
1
22
XPA0013 1/4-18 NPT INLET BUSHING ASSEMBLY
1
23
XPA0014 VALVE SPRING
1
24
XPA0007 VALVE
1
25
XPA0009 VALVE SEAT
1
26
XPA0008 VALVE STEM ASSEMBLY
1
27
XPA0043 9 mm x 1.5 mm O-RING
1
28
XPA0380 SPEED CONTROL
2
29
XPA0039 INTERNAL RETAINING RING
1
30
XPA0107 .394 in. (10.0 mm) RETAINING RING
1
31
XPA0149 10 x 19 x 5 BEARING - NO SEALS/SHIELDS
1
32
XPA0199 SPACER, 14.5 ID x 18.5 OD x 0.2 THK
1
33
XPA0150 10 x 19 x 5 BEARING, 2 SEALS
1
34
XPA0108 SHIM, 10.1 ID x 14.0 OD x 0.2 THK
1
35
XPA0109 BELLEVILLE WASHER, 12.2 ID x 19.0 OD x 1.1 HT
1
36
XPA0119 19.1 mm RETAINING RING
1
37
XPB0406 SPINDLE
1
38
XPB0442 HANGER - 485C RED
1
39
XPA1991 8,000 RPM INTERNAL MUFFLER ASSY
1
PARTS PAGE FOR 3M
8,000 RPM 3/16 MINI ROS
XPC0314
P/N
TITLE
DRWN BY / DATE
NA
MATERIAL
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF X'POLE PRECISION TOOLS INC. ANY REPRO-
DUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN
PERMISSION OF X'POLE PRECISION TOOLS INC. IS PROHIBITED.
CKD BY / DATE
ENG APP / DATE
STD TOL
.X +/-
.XX +/-
.XXX +/-
XX/XX +/-
ANGLES +/-
NA
NA
NA
NA
NA
X'POLE
PRECISION
TOOLS INC.
RED
04/22/08
PWH
04/22/08