3M Multimedia Projector S40 Operator's Manual

Other manuals for Multimedia Projector S40: Specification Sheet, Safety Manual, Quick Start Manual, Operator's Manual

Summary of Multimedia Projector S40

  • Page 1

    S40/x40 multimedia projector operator's guide technical.

  • Page 2: Technical

    1 technical technical signal connector pin assignment rgb d-sub 15-pin shrink mini din 4-pin s-video mini din 4-pin pin no signal 1 color: 0.286vp-p (ntsc, burst signal), 75 Ω terminator 0.3vp-p (pal/secam, burst signal), 75 Ω terminator 2 brightness: 1.0vp-p, 75 Ω terminator 3 ground 4 ground pin n...

  • Page 3: Example of Computer Signal

    2 resolution h ×× v fh (khz) fv (hz) rating signal mode display mode s40 x40 720 × 400 37.9 85.0 vesa text zoom in zoom in 640 × 480 31.5 59.9 vesa vga (60hz) zoom in zoom in 640 × 480 35.0 66.7 mac13"mode zoom in zoom in 640 × 480 37.9 72.8 vesa vga (72hz) zoom in zoom in 640 × 480 37.5 75.0 vesa v...

  • Page 4: Initial Set Signals

    3 the following signals are used for the initial settings. The signal timing of some computer models may be different. In such case, refer to adjust the v.Posit and h.Posit of the menu. Data hsync data vsync display interval c back porch b sync a front porch d display interval c back porch b sync a ...

  • Page 5: Communications Setting

    4 (1) turn off the projector and computer power supplies and connect with the rs-232c cable. (2) turn on the computer power supply and after the computer has started up, turn on the projector power supply. Control jack d-sub 15-pin shrink jack 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 rd td gnd selo rts 1...

  • Page 6

    5 requesting projector status (get command) (1) send the request code header + command data (‘02h’+‘00h’+ type (2 bytes) +‘00h’+‘00h’) from the computer to the projector. (2) the projector returns the response code ‘1dh’+ data (2 bytes) to the computer. Changing the projector settings (set command) ...

  • Page 7: Command Data Chart

    6 command data chart names operation type header command data crc action type setting code blank color set blue be ef 03 06 00 cb d3 01 00 00 30 03 00 white be ef 03 06 00 6b d0 01 00 00 30 05 00 black be ef 03 06 00 9b d0 01 00 00 30 06 00 get be ef 03 06 00 08 d3 02 00 00 30 00 00 mirror set norma...

  • Page 8

    7 names operation type header command data crc action type setting code h.Position reset execute be ef 03 06 00 ic d3 06 00 03 70 00 00 h.Size reset execute be ef 03 06 00 68 d2 06 00 04 70 00 00 color balance r reset execute be ef 03 06 00 94 d3 06 00 05 70 00 00 color balance b reset execute be ef...

  • Page 9

    8 command data chart (continued) names operation type header command data crc action type setting code contrast get be ef 03 06 00 fd d3 02 00 04 20 00 00 increment be ef 03 06 00 9b d3 04 00 04 20 00 00 decrement be ef 03 06 00 4a d2 05 00 04 20 00 00 color balance r get be ef 03 06 00 01 d2 02 00 ...

  • Page 10

    9 names operation type header command data crc action type setting code tint get be ef 03 06 00 49 73 02 00 03 22 00 00 increment be ef 03 06 00 2f 73 04 00 03 22 00 00 decrement be ef 03 06 00 fe 72 05 00 03 22 00 00 video format set auto be ef 03 06 00 9e 75 01 00 00 22 0a 00 ntsc be ef 03 06 00 f...

  • Page 11

    3m austin center building a145-5n-01 6801 river place blvd. Austin, tx 78726-9000 3m canada p.O. Box 5757 london, ontario n6a 4t1 3m mexico, s.A. De c.V. Apartado postal 14-139 mexico, d.F. 07000 mexico 3m europe boulevard de l'oise 95006 cerge pontoise cedex france litho in japan © 3m 200 3 78- 697...