X70/x80 multimedia projector product safety guide x70/x80 projecteur multimedia - guide de sécurité de produit x70/x80 multimedia-projektor - sicherheitsanleitung des geräts x70/x80 proyector de multimedia - guiá de seguridad del producto x70/x80 proiettore multimediale - guida di sicurezza del prod...
3m™ multimedia projector x70/x80 product safety guide © 3m 2004 2 table of contents english safety information ....................................................................................................................................... 3 product safety labels ................................
3m™ multimedia projector x70/x80 product safety guide © 3m 2004 3 safety information read, understand, and follow all safety information contained in the “product safety guide” and in the “operator’s guide” prior to using the x70/x80 multimedia projector. Service personnel must also read and underst...
3m™ multimedia projector x70/x80 product safety guide © 3m 2004 4 • to reduce the various risks associated with this product, which if not avoided could result in death or serious injury, and/or property damage: - read and understand all safety instructions found in this “product safety guide” as we...
3m™ multimedia projector x70/x80 product safety guide © 3m 2004 5 warning (continued) • to reduce the risk associated with the hot surface temperatures produced by the projection lamp, which if not avoided may result in death or serious injury: - never touch the projection lamp or surrounding surfac...
3m™ multimedia projector x70/x80 product safety guide © 3m 2004 6 caution (continued) • to reduce the risk associated with sharp edges or broken glass inside the lamp compartment, which if not avoided may result in minor or moderate injury: - use care when inserting hand into the lamp compartment wh...
3m™ multimedia projector x70/x80 product safety guide © 3m 2004 7 product safety labels english jqa made in china p s c avoid exposure-laser radiation is emitted from this aperture c a u t i o n wave length: 640-660nm max output: 1mw class 2 laser product comples with 21 cfr, 1040.10 and 1040.11 ieo...
3m™ multimedia projector x70/x80 product safety guide © 3m 2004 8 lamp lamp operation: the following symptoms may indicate a lamp in need of replacement: • lamp indicator lights up red. • “change the lamp” message appears on the screen. • to reduce the risk associated with air or ground water contam...
3m™ multimedia projector x70/x80 product safety guide © 3m 2004 9 9 replacing lamp • to reduce the risk associated with hazardous voltage, which if not avoided could result in death or serious injury: - switch power “off” and disconnect the plug from electrical outlet before attempting any cleaning,...
3m™ multimedia projector x70/x80 product safety guide © 3m 2004 1 0 √ note reset the lamp operation hours. See “reset lamp hours” for details. English 3. Remove lamp module: carefully slide the lamp module out (4) using steady pressure. 4. Insert lamp module: carefully insert (4) the new lamp module...
3m™ multimedia projector x70/x80 product safety guide © 3m 2004 1 1 warranty limited warranty 3m warrants this product against any defects in material and workmanship, under normal usage and storage, for a period of three years from date of purchase. Proof of purchase date will be required with any ...
Intended use before operating this machine, please read this entire manual thoroughly. The 3m tm multimedia projectors are designed, built, and tested for use indoors, using 3m lamps, 3m ceiling mount hardware, and nominal local voltages. The use of other replacement lamps, outdoor operation, or dif...
