3M Opticom Installation Instructions Manual - page 6
4
Vehicle Equipment Installation Instructions
2.4 Safety Messages Contained in this
Manual
The following safety messages appear in this manual:
WARNING
This equipment has been approved for mobile
applications where the equipment should be
used at distances greater than 20cm from the
human body (with the exception of hands, wrists,
feet and ankles). Operation at distances less
than 20cm is strictly prohibited.
NOTE
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the
interference at his own expense.
NOTICE
This Class A digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe A
conforme à la norme NMB-003 du Canada.
IMPORTANT NOTE
Modifying the radio/GPS unit may seriously
damage the equipment and void the warranty.
Do not attempt to modify the radio/GPS
circuitry in any way. Modifying the radio
and/or antenna in any way may cause the radio
to violate FCC requirements.
WARNING
Vehicle batteries contain sulfuric acid and
may contain explosive gases. Keep sparks,
flames, and cigarettes away. Wear eye
protection. Disconnect the negative
cable first to prevent shorting the positive
terminal to the chassis when removing
the positive cable. Battery acid may cause
skin irritation and eye injury. Explosive gases
may cause severe injury or death.
WARNING
A completed installation that is not tested may
result in improper system operation, which may
result in accidents and/or injuries. To avoid
this problem, test the system to verify
proper operation. Improper system operation
may result in unsafe driver action.