3M Scotch-Weld Hot Melt Applicator EC Owner's Manual - Important Notice
Temperature Module Selections for
3M™ Scotch-Weld™ Hot Melt Quadrack™ Adhesives
Scotch-Weld
Temperature
Adhesive
Description
Color
Resistance
Module
3779 Q
High performance adhesive for
Amber
300°F (149°C)
(5)
many electrical or electronic applications.
Meets UL 94 V-O requirements.
3789 Q
High performance, general purpose
Light
220°F (105°C)
(5)
adhesive with good resistance to
Yellow
plasticizer migration. Bonds many
plastics including supported and
unsupported vinyls.
3792 Q
Clear, general purpose adhesive
Clear
140°F (60°C)
(4)
has a long open time and good delivery
rate. Excellent adhesion to many plastics,
glass, and wood. Exhibits good resistance
to shock at both 0°F and ambient temperatures.
3792LM Q
Similar to 3792 Q adhesive except
Clear
140°F (60°C)
(1)
applied at substantially lower temperature.
Important Notice
User is responsible for determining whether the 3M product is fit for a
particular purpose and suitable for user’s method of application.
Please remember that many factors can affect the use and performance of
a 3M product in a particular application. The materials to be bonded
with the product, the surface preparation of those materials, the product
selected for use, the conditions in which the product is used, and the time
and environmental condition in which the product is expected to perform
are among the many factors that can affect the use and performance of a
3M product. Given the variety of factors that can affect the use and
performance of a 3M product, some of which are uniquely within the
user’s knowledge and control, it is essential that the user evaluate the 3M
product to determine whether it is fit for a particular purpose and suitable
for the user’s method of application.
Caution
Use only the proper temperature
module for the 3M™ Quadrack™
adhesive used. Failure to do so
may cause burns or damage
applicator.
Refer to Table 1 in the
Temperature Module Installation
section for proper module selection
for 3M Quadrack adhesive used.
!
© 3M 2006
30