3onedata NP30XT series User Manual - page 7
CLI user manual
Page4
Port --Enter port setting view
Serial --Enter Serial setting menu
Manage --Enter system manage view
Information --Enter device information view
2)Type in a command and “?”, between there is a space, if key word is in this location, then type in all keywords
and descriptions.
Example:
Switch (information)# show ?
mac --show device MAC Address
version --show device version
others --show device type、name、etc
2. Partial help
1)Type in a character string with >. It can show all commands beginning with this character string.
Example:
Switch# m?
Manage --Enter system manage menu
2)Type in former letters of some key word of the command, press
show the completed key word.
Example:
Switch# inf+
Switch# information
1.3.3
Frequent Incorrect Information of Command Lines
All commands typed by users, if it is certificated by grammar, it can run correctly, or users will be sent
incorrect information. Frequent incorrect information is in table 1.4.3 as below:
Table 1.4.3 Frequent incorrect information
English incorrect information
Reason
Invalid Command
Command cannot be found.
Key word cannot be found.
The type of parameter is wrong.
The parameter is beyond the border.
Incomplete Command
Command is not completed.
Too many parameters
Parameter is too much.
Must OneToOne option!
Based mode is necessary
1.3.4 History command
Command lines port can provides the function similar to Dos key. It automatic saves command lines that
users types in, and users can use these history commands. Detailed operating please check table 1.3.4
as follows:
Table 1.3.4 access history command
Operating
Key
Result
Visit previous history command Up <↑>
If it exists earlier command, it is taken out.
Visit next history command
Down <↓>
If it exists later command, it is taken out.