3Ware 9690SA Series Installation Manual - page 28
Other manuals for 9690SA Series:
User Manual, Specification
Manual is about: SAS/SATA RAID Software RAID controllers
of
31
Chapter 3. Installing a Battery Backup Unit
24
3ware 9690SA SAS/SATA RAID Controller Installation Guide
Figure 15 shows how removing the connector looks if you
remove the BBU control module from the controller.
Figure 15.
Removing the power cable from the BBU module
3
Remove the remote battery board from your system.
a
Press down on the top of the battery module to free the clip
on the bottom of the module.
b
While pressing down on the top of the battery module, lift
out the bottom of the battery module slightly.
Press down on the
lever-like clip and pull
the connector out.