- DL manuals
- 4IPNET
- Gateway
- HSG326
- User Manual
4IPNET HSG326 User Manual - Chapter 2. Wmi
User’s Manual
HSG326 Wireless Hotspot Gateway
ENGLISH
13
Chapter 2. WMI
2.1. Web Management Interface
The Web Management Interface (WMI) of the HSG Wireless Hotspot Gateway can
be accessed through a web browser (Firefox, Chrome, and Safari recommended) of
any PC connected to the LAN interface with the default IP address of
192.168.1.254.
The default administrator account and password is:
Username: “admin”
Password: “admin”
Upon the first login, the system prompts for the administrator to change password
to enforce system security. The password needs to be at least 6 characters long and
include at least one alphabet and one number.
You may refer to part F. of Appendix E for details on admin accounts configuration.
Summary of HSG326
Page 1
User’s manual v1.00.00 hsg326 wireless hotspot gateway.
Page 2
User’s manual hsg326 wireless hotspot gateway english ii copyright the contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic,...
Page 3
User’s manual hsg326 wireless hotspot gateway english iii table of contents chapter 1. Introduction ........................................................................ 6 1.1 4ipnet solution overview ........................................................................ 6 1.2 key terms & conce...
Page 4
User’s manual hsg326 wireless hotspot gateway english iv chapter 8. Utilities for controller management ................................... 70 8.1 administrator account management .................................................. 70 8.2 configuration backup & restore ..................................
Page 5
User’s manual hsg326 wireless hotspot gateway english v 1) groups .................................................................................... 164 2) internal authentication .............................................................. 165 3) external authentication ...........................
Page 6: Chapter 1. Introduction
User’s manual hsg326 wireless hotspot gateway english 6 chapter 1. Introduction 1.1 4ipnet solution overview 4ipnet hsg & whg are designed for network management over almost all current network architectures, layer 2 (data link layer) and layer 3 (network layer). 4ipnet hsg are suitable in layer 2 n...
Page 7
User’s manual hsg326 wireless hotspot gateway english 7 【 layer 2 network in tag based mode】 layer 3 networks not only span physically under the lan ports of 4ipnet whg, it is also capable of reaching over different ip networks to manage remote sites with routable ip address via tunnels. 【 layer 3 n...
Page 8
User’s manual hsg326 wireless hotspot gateway english 8 1.2 key terms & concepts gateway is an edge device or network node where a small network attaches to a bigger network. 4ipnet hsg wireless hotspot gateways are in essence gateways in a network environment. Conventionally, the bigger network is ...
Page 9
User’s manual hsg326 wireless hotspot gateway english 9 useful for both implementing account roaming and centralized account management. Service zone is a logic partition of 4ipnet hsg wireless hotspot gateway’s lan. The concept of service zone is that it is a virtual gateway with customizable login...
Page 10
User’s manual hsg326 wireless hotspot gateway english 10 policy, they will be governed by a default catch-all policy named ‘global-policy’. The global-policy is a base policy which will be applied to all users if not applied with another policy. The following figure is an example that depicts the re...
Page 11
User’s manual hsg326 wireless hotspot gateway english 11 1.3 recommended configuration sequence set up system’s time zone, ntp server, dns server and wan address configure lan address range for at least one service zone, and enable its authentication. Create user accounts to test the login page via ...
Page 12
User’s manual hsg326 wireless hotspot gateway english 12 customers with needs to fulfill specific applications, integration with 3 rd party devices, customization etc., please refer to chapters 11 and beyond for advanced feature setup..
Page 13: Chapter 2. Wmi
User’s manual hsg326 wireless hotspot gateway english 13 chapter 2. Wmi 2.1. Web management interface the web management interface (wmi) of the hsg wireless hotspot gateway can be accessed through a web browser (firefox, chrome, and safari recommended) of any pc connected to the lan interface with t...
Page 14
User’s manual hsg326 wireless hotspot gateway english 14 the wmi welcome page is as shown below after a successful administrator login. Note 1. To logout, simply click the logout icon on the upper right corner of the interface to return to the login screen..
Page 15: 3.1. Network Planning
User’s manual hsg326 wireless hotspot gateway english 15 chapter 3. Basic network settings 3.1. Network planning before installing the 4ipnet hsg wireless hotspot gateway, careful network planning is required in order to meet the networking needs with the most efficient utilization of network resour...
Page 16
User’s manual hsg326 wireless hotspot gateway english 16 layer 2 network design guidelines always connect hierarchically. If there are multiple switches in a building, use an aggregation switch. Locate the aggregation switch close to the network core (e.G. Mainframe housing) locate edge switches clo...
Page 17
User’s manual hsg326 wireless hotspot gateway english 17 select the connection type applicable to you. For example, if your isp is cable modem issuing dynamic address, then you would select dynamic connection. Static: manually specifying the ip address of the wan port. The fields with red asterisks ...
Page 18
User’s manual hsg326 wireless hotspot gateway english 18 3.2.3. Uplink detection & failover uplink detection when the wan interface has been configured with a valid uplink connection, administrator may specify up to three outbound sites as detection target for verifying whether the uplink service is...
Page 19
User’s manual hsg326 wireless hotspot gateway english 19 3.3. Downlink (lan side) vlan option the downlink of hsg wireless hotspot gateway is basically your managed network deployed for service. There are two types of deployment mode for networks attached to the lan ports of the hsg wireless hotspot...
Page 20
User’s manual hsg326 wireless hotspot gateway english 20 3.3.2. Tag-based service zone tag-based operation mode operates under the principle that different service zones are identified by vlan id. This means that tag-based operation allows each physical lan port to accept traffic for any enabled ser...
Page 21
User’s manual hsg326 wireless hotspot gateway english 21 chapter 4. User authentication database 4.1. Authentication database configuration authentication database is a storage device where users’ credentials may be inquired for validity. When a user is associated to an authentication enabled in ser...
Page 22
User’s manual hsg326 wireless hotspot gateway english 22 【 graphical illustration of authentication databases in relation to hsg wireless hotspot gateway】 the configurations of authentication options for internal and external authentication are done separately. The 2 external authentication servers ...
Page 23
User’s manual hsg326 wireless hotspot gateway english 23 4.2. Built-in authentication databases configuration path: main menu >> users >> internal authentication 4.2.1. Local user database this type of authentication method checks the local database that stores user, often the staff and credentials ...
Page 24
User’s manual hsg326 wireless hotspot gateway english 24 note 1. The fields with red asterisk are mandatory fields while the others are optional. 2. Mac address field once configured will bind this particular account under the condition that it may only be granted access using the device specified. ...
Page 25
User’s manual hsg326 wireless hotspot gateway english 25 note 1. The txt files generated may be inter-used by all hsg wireless hotspot gateway series as the defined csv format are consistent for all models. 2. Duplicated accounts will result in upload failure and a warning message will be displayed....
Page 26
User’s manual hsg326 wireless hotspot gateway english 26 4.2.2. On-demand user database the on-demand user database is designed for guest user account provisioning with time or traffic volume constraints. Ideal for deployment needs of hotels, hotspot venues, enterprise visitor reception, and more. T...
Page 27
User’s manual hsg326 wireless hotspot gateway english 27 on-demand account settings 1. General settings for the on-demand account database can be configured on this page. General settings include the customization of pos/web tickets, payment gateway options, and etc. When terminal servers (such as t...
Page 28
User’s manual hsg326 wireless hotspot gateway english 28 with a set of clickatell account username/password, the sms gateway can be configured to send sms messages upon on-demand account creation. The sms service can be used for free access, paid access with payment gateway integration,.
Page 29
User’s manual hsg326 wireless hotspot gateway english 29 or both. Define an api id and activate the desired billing plans. Multiple billing plans may be activated if needed. To prevent the sms gateway from being flooded by sms queries for account generation, an account registration control option is...
Page 30
User’s manual hsg326 wireless hotspot gateway english 30 on-demand accounts configuration path: main menu >> users >> on-demand accounts after enabling the selected billing plans, on-demand accounts generation can be done on on-demand account creation. On-demand accounts can be created individually ...
Page 31
User’s manual hsg326 wireless hotspot gateway english 31 valid = on-demand account in active or quota remaining total = valid + out-of-quota + expired besides, such valid and total number of on-demand accounts are informed in the end of this list. 4.2.3. The guest authentication option the guest aut...
Page 32
User’s manual hsg326 wireless hotspot gateway english 32 step1: setting up the guest authentication profile. Selecting visible helps administrators enable guest login input which allows clients to access internet by entering emails. The e-mail denial list checks the email domains for login permissio...
Page 33
User’s manual hsg326 wireless hotspot gateway english 33 email verification ensures that the entered email is a valid email address. When this option is enabled, an activation time is allocated to the client. The client then has to activate this account within the activation time to extend his/her u...
Page 34
User’s manual hsg326 wireless hotspot gateway english 34 step2: setting up the social media login profile. 4ipnet whg-series controllers also provide a convenient method for guest authentication; social media login enables client to access internet by logging in with their own social media accounts,...
Page 35
User’s manual hsg326 wireless hotspot gateway english 35 step3: implement into specific service zones and login pages choose the desired service zone where you would like to apply the guest authentication option - go to main menu > system > service zone > configure. Scroll down the page to authentic...
Page 36
User’s manual hsg326 wireless hotspot gateway english 36 4.3. External authentication options most organizations have already established a centralized user account servers. Consequently, 4ipnet hsg wireless hotspot gateways are equipped with a variety of external authentication options so as to sup...
Page 37
User’s manual hsg326 wireless hotspot gateway english 37 server 2 by default is configured to use radius authentication. 4ipnet hsg wireless hotspot gateways support radius authentication, radius class mapping, and radius transparent login with 802.1x. Below is the detailed configuration page of rad...
Page 38
User’s manual hsg326 wireless hotspot gateway english 38.
Page 39
User’s manual hsg326 wireless hotspot gateway english 39 another important setting field is the class-group mapping on the page. It is a translation setting which maps radius classes to different groups on the 4ipnet hsg wireless hotspot gateway, enabling different radius accounts to be incorporated...
Page 40
User’s manual hsg326 wireless hotspot gateway english 40 when a user clicks the button to sign in with social media accounts, he/ she will be redirected to the social media sites for login and granting permissions. This configuration page is where how controller to connect with social media sites. L...
Page 41
User’s manual hsg326 wireless hotspot gateway english 41 chapter 5. Group attributes & policy rules all 4ipnet hsg wireless hotspot gateway models utilize ‘group’ and ‘policy’ to define user accessibility and network privileges in order to set constraints on users’ behavior. Since grouping, policy s...
Page 42
User’s manual hsg326 wireless hotspot gateway english 42 on-demand users, local users, may be assigned to different groups per account. As for those who are authenticated by external servers, 4ipnet hsg wireless hotspot gateways also offer group assignment per account for radius via class- group map...
Page 43
User’s manual hsg326 wireless hotspot gateway english 43 group and policy profiles are separated for more flexibility. This allows users of the same groups to be bound with different policies according to group-service zone permission mapping settings the administrator defines. For instance, a user ...
Page 44
User’s manual hsg326 wireless hotspot gateway english 44 5.2 practical setups of group and policies this section demonstrates with screenshots on how to practically set up the groups and policies on the wmi of the 4ipnet hsg wireless hotspot gateway. group overview configuration path: main menu >>...
Page 45
User’s manual hsg326 wireless hotspot gateway english 45 check the status checkboxes to allow users of this group to access the corresponding service zones. To configure from a service zone’s perspective please go to access permission and authorization in service zone settings..
Page 46
User’s manual hsg326 wireless hotspot gateway english 46 policy settings configuration path: main menu >> users >> policies >> policy configuration 1. Select policy allows administrator to choose which policy profile to configure. 2. Firewall profile is for defining service protocols, user firewal...
Page 47
User’s manual hsg326 wireless hotspot gateway english 47 3. Privilege profile configures the on-demand account creation, password change privileges and maximum concurrent sessions. 4. Qos profile allows administrator to edit traffic configuration. 5. Specific route profile is where the administrator...
Page 48
User’s manual hsg326 wireless hotspot gateway english 48 grouping users a group is determined by authentication servers, class (radius) or accounts individually (local, on-demand). Generally a group is assigned to all users of an authentication option users > authentication > auth option > group h...
Page 49
User’s manual hsg326 wireless hotspot gateway english 49 the policy enforcement priority is as follows: authentication is enabled: group-service zone mapping > global policy authentication is disabled: service zone default policy > global policy.
Page 50: 6.2 Service Zone Setup
User’s manual hsg326 wireless hotspot gateway english 50 chapter 6. Basic service zone configuration 6.1 the concept of service zone service zones are virtual partitions of the physical lan side of a 4ipnet controller. Similar to vlans, they can be separately managed and defined, having their own us...
Page 51
User’s manual hsg326 wireless hotspot gateway english 51 which lan port. A simple concept is displayed in the picture below. As the figure depicts, a staff of a firm is associated with a certain ssid broadcast by an access point. This ssid belongs to, let’s say, vap with vlan id 15. Therefore the ap...
Page 52
User’s manual hsg326 wireless hotspot gateway english 52 if the setting is change to tag-based, the correspondence of service zones and ports will be grayed out. Each service zone will need to be assigned a unique vlan id, ranging from 1 to 4096. Note that the default service zone is designed to be ...
Page 53
User’s manual hsg326 wireless hotspot gateway english 53 6.2.2. Nat mode or router mode configuration path: main menu >> system >> service zones >> configure nat is the acronym for network address translation which translates private ip addresses for devices on the lan side of a controller to routab...
Page 54
User’s manual hsg326 wireless hotspot gateway english 54 passes through the gateway. When a switch or ap is being deployed, station isolation has to be enabled on the ap/switch. Clients isolation: all clients on the same layer 2 network are isolated from one another in this service zone. None: no is...
Page 55
User’s manual hsg326 wireless hotspot gateway english 55 timeout. 4. Reserving ip addresses – a configuration list for reserving certain ip’s within the dhcp server ip range for specific devices, for example an internal file server. 5. Dhcp lease protection – this is an optional checking mechanism o...
Page 56
User’s manual hsg326 wireless hotspot gateway english 56 1. Databases administrator can designate configured auth servers for use. Postfix will be used as auth server identifier when more than one auth server is enabled for service. 2. Portal url the specification of a desired landing page may be co...
Page 57
User’s manual hsg326 wireless hotspot gateway english 57 4. Ppp dial-up authentication point-to-point protocol (ppp) is a data link protocol commonly used in establishing a direct connection between two networking nodes. When this feature is enabled for service, end users may configure a dial-up con...
Page 58
User’s manual hsg326 wireless hotspot gateway english 58 the ip address range assignment field configures the starting ip range which ppp can assign ip addresses to dial-up virtual interfaces. The assigned interface ip address is used to route between the networks on both side of the tunnel. 6.2.7. ...
Page 59
User’s manual hsg326 wireless hotspot gateway english 59 there are three customization options to choose from apart from the 4ipnet default page: customize with template, upload your own, and use external page. 4ipnet default: the gateway has a standard 4ipnet default login page with the 4ipnet logo...
Page 60
User’s manual hsg326 wireless hotspot gateway english 60 use external page: the login page can be a defined external url. This option requires extensive knowledge of url parameter utilization that works together with the message pages and should be organized carefully. For more details on external l...
Page 61: Environment
User’s manual hsg326 wireless hotspot gateway english 61 chapter 7. Advance settings for network environment 7.1 network utilities configure network utility; go to: main menu >> utilities >> network utilities the system provides network utilities to help administrators manage the network easily..
Page 62
User’s manual hsg326 wireless hotspot gateway english 62 item description ipv4 ping: it allows administrator to detect a device using ip address or host domain name to see if it is responding. Trace route: it allows administrator to recover the real path of packets from the gateway to a destination ...
Page 63: 7.2 Black List
User’s manual hsg326 wireless hotspot gateway english 63 7.2 black list network operators may want to limit the accessibility of certain accounts or devices from authentication or association from time to time. This section describes the ways in which user or device restrictions may be achieved. Con...
Page 64
User’s manual hsg326 wireless hotspot gateway english 64 after entering the usernames in the username blanks fields and the related information in the remark blank fields (not required), click apply to add the users. To remove a user from the black list, select the user and click delete to remove th...
Page 65: 7.3 Certification
User’s manual hsg326 wireless hotspot gateway english 65 7.3 certification configuration path: main menu >> utilities >> certificate 4ipnet hsg wireless hotspot gateways can issue certificates in its private network. Administrator can sign certificates issues by the system’s root ca. Also, they coul...
Page 66
User’s manual hsg326 wireless hotspot gateway english 66 certificates to be uploaded. To view details of the certificate, click the corresponding "view" button. Click "get cert" and "get key" to download the certificate and public key onto your local disk. To upload a certificate/private key/interme...
Page 67
User’s manual hsg326 wireless hotspot gateway english 67 7.3.2 internal root ca the administrator can upload an internal root ca, or generate a root ca for private use. The created root ca certificate can be downloaded and used to sign certificates generated by the system. Note that the system only ...
Page 68
User’s manual hsg326 wireless hotspot gateway english 68 to view details of the certificate, click the "view" button. 7.3.3 internally issued certificate internally issued certificates can be generated on this page. Note that an internal root ca needs to be created first before internally issued cer...
Page 69: 7.4 Management Access
User’s manual hsg326 wireless hotspot gateway english 69 7.3.4 trusted certificate authorities apart from self signed certificate and system's root ca, administrators can also upload other certificates signed by other ca entities or trusted cas into the system. These trusted root ca certificates are...
Page 70: Management
User’s manual hsg326 wireless hotspot gateway english 70 chapter 8. Utilities for controller management 8.1 administrator account management configuration path: main menu >> utilities >> administrator account the hsg wireless hotspot gateway’s root management account is the “admin” account with full...
Page 71
User’s manual hsg326 wireless hotspot gateway english 71 step 1: configure password safety settings password safety can be enabled to protect the web management interface from unauthorized personnel. Note that these settings are disabled by default..
Page 72
User’s manual hsg326 wireless hotspot gateway english 72 step 2: configure group access property the controller supports customizable administration account types, namely super group, manager, on-demand manager or operator. Admin is classified under super group, with all access and configuration aut...
Page 73
User’s manual hsg326 wireless hotspot gateway english 73 step 3: an administrator accounts list is available to display administrator accounts information and their statuses. Create an account by clicking “add”, then inputting the desired account name, password and the assigned authority group. Subs...
Page 74: 8.3 Firmware Upgrade
User’s manual hsg326 wireless hotspot gateway english 74 note 1. The general backup feature will lead to a pop up window prompting to save a db file. 2. Restoring previous db configurations may be performed with options such as keep wan settings to prevent the loss of wmi connection if this action i...
Page 75
User’s manual hsg326 wireless hotspot gateway english 75 when the resource of the system is not enough for upgrade process, system will request restart and change system to maintenance mode to ensure the system upgrade success. After system restart in maintenance mode, click browse to search for the...
Page 76: 8.4 Restart
User’s manual hsg326 wireless hotspot gateway english 76 8.4 restart configuration path: main menu >> utilities >> restart this function allows the administrator to safely restart hsg wireless hotspot gateway, and the process might take several minutes to complete. Select restart the system in regul...
Page 77: 9.1 System Related Status
User’s manual hsg326 wireless hotspot gateway english 77 chapter 9. Reports and logs for monitoring 9.1 system related status 9.1.1 system summary configuration path: main menu >> status >> system summary the system status page displays a table of contents including system firmware version, report s...
Page 78
User’s manual hsg326 wireless hotspot gateway english 78.
Page 79
User’s manual hsg326 wireless hotspot gateway english 79 a selection of reports is available when the “see reports” button is clicked. These reports can be sorted based on interface and intervals. 9.1.2 network interface configuration path: main menu >> status >> interface this section provides the ...
Page 80
User’s manual hsg326 wireless hotspot gateway english 80 note 1. If statistics are required to be saved for long term keeping, see report & notification section for instructions to send and save network traffic on external servers. 9.1.3 routing configuration path: main menu >> status >> routing tab...
Page 81
User’s manual hsg326 wireless hotspot gateway english 81 statistics of offered list valid lease counts of the last 10 minutes, hours and days are shown here. The header 1 ~ 10 are unit multipliers; for instance the number under column 2 indicates the lease count in the last 20 minutes/hours/days, th...
Page 82
User’s manual hsg326 wireless hotspot gateway english 82 9.2 client related status 9.2.1 online user configuration path: main menu >> status >> monitor users >> online users users displayed on this page are the ones that are authenticated by this controller under its managed network either lan or re...
Page 83
User’s manual hsg326 wireless hotspot gateway english 83 9.2.2 associated non login users configuration path: main menu >> status >> monitor users >> non-login devices this page shows users that have acquired an ip address from the system’s dhcp server but have not yet been authenticated, either und...
Page 84
User’s manual hsg326 wireless hotspot gateway english 84 9.2.4 session list configuration path: main menu >> status >> sessions this page allows the administrator to inspect sessions currently established between a client and the system. Each result displays the ip and port values of the source and ...
Page 85: 9.3 Logs And Reports
User’s manual hsg326 wireless hotspot gateway english 85 9.3 logs and reports 9.3.1 system related configuration path: main menu >> status >> logs and reports this page displays the system’s local log and user events since system boot up. Administrators can examine the log entries of various events....
Page 86
User’s manual hsg326 wireless hotspot gateway english 86 9.3.2 user events configuration path: main menu >> status >> logs and reports >> user events this page is packed with all user logs and events. User logs and events can be stored up to 40 days. Displays all user related information customizabl...
Page 87
User’s manual hsg326 wireless hotspot gateway english 87 9.4 reports & notification configuration path: main menu >> status >> reporting hsg wireless hotspot gateway can automatically send various kinds of user and/or system related reports to configured e-mail addresses, syslog servers, or ftp serv...
Page 88
User’s manual hsg326 wireless hotspot gateway english 88 smtp settings: allows the configuration of 5 recipient e-mail addresses and necessary mail server settings where various user related logs will be sent to. Syslog settings: allows the configuration of two external syslog servers where selected...
Page 89
User’s manual hsg326 wireless hotspot gateway english 89 chapter 10. Hotspot application 10.1 on-demand billing plans configuration path: main menu >> users >> internal authentication >> on- demand >> billing plans billing plan profiles define the terms and conditions of guest internet access. Click...
Page 90
User’s manual hsg326 wireless hotspot gateway english 90 10.2 on-demand billing plan types 10.2.1 usage-time with expiration time users can access internet as long as account is valid with remaining quota (usable time). Users need to activate the purchased account within a given time period by loggi...
Page 91
User’s manual hsg326 wireless hotspot gateway english 91.
Page 92
User’s manual hsg326 wireless hotspot gateway english 92 10.2.2 usage-time with no expiration time users can access internet as long as account has remaining quota (usable time). Users need to activate the purchased account within a given time period by logging in. This is ideal for short term usage...
Page 93
User’s manual hsg326 wireless hotspot gateway english 93.
Page 94
User’s manual hsg326 wireless hotspot gateway english 94 10.2.3 hotel cut-off-time hotel cut-off-time is the clock time (normally check-out time) at which the on- demand account is cut off (made expired) by the system on the following day or many days later. On the account creation ui of this plan, ...
Page 95
User’s manual hsg326 wireless hotspot gateway english 95 10.2.4 volume users can access internet as long as account is valid with remaining quota (traffic volume).Account expires when valid period is used up or quota is depleted. This is ideal for small quantity applications such as sending/receivin...
Page 96
User’s manual hsg326 wireless hotspot gateway english 96 file etc. Count down of valid period is continuous regardless of logging in or out. account activation is the time period for which the user must execute a first login. Failure to do so in the time period set in account activation will resul...
Page 97
User’s manual hsg326 wireless hotspot gateway english 97 10.2.5 duration-time with elapsed time account is activated upon account creation. Count down begins immediately after account is created and is continuous regardless of logging in or out. Account expires once the elapsed time is reached. This...
Page 98
User’s manual hsg326 wireless hotspot gateway english 98 elapsed time is the time interval for which the account is valid for internet access (xx hrs yy mins). number of devices is to define the number of allowed simultaneous logged in devices per account. price is the unit price of this plan....
Page 99
User’s manual hsg326 wireless hotspot gateway english 99 10.2.6 duration-time with cut-off time cut-off time is the clock time at which the on-demand account is cut off (made expired) by the system on that day. For example if a shopping mall is set to close at 23:00; operators selling on-demand tick...
Page 100
User’s manual hsg326 wireless hotspot gateway english 100 10.2.7 duration-time with begin-and-end time the begin time and end time of the account are defined explicitly. Count down begins immediately after account activation and expires when the end time has.
Page 101
User’s manual hsg326 wireless hotspot gateway english 101 been reached. This is ideal for providing internet service throughout a specific period of time. For example during exhibition events or large conventions such as computex where each registered participant will get an internet account valid f...
Page 102
User’s manual hsg326 wireless hotspot gateway english 102 10.3 terminal server setup configuration path: main menu >> users >> authentication >> on-demand user >> general settings >> terminal server terminal configuration is a list of serial-to-ethernet devices that communicate with the system only;...
Page 103
User’s manual hsg326 wireless hotspot gateway english 103 keypad panel overview useful shortcut keys combination function ‘number’ + enter to create and print out an on-demand account of an enabled billing plan of the uplink hotspot gateway mainly for the user who purchased an account. ‘number 1’ + ...
Page 104
User’s manual hsg326 wireless hotspot gateway english 104 4ipnet gateway (hsg/whg). Func + enter to clear what is pressed. This is used when the operator pressed a wrong button or combination. The system will also clear it automatically after five seconds. Func + ‘0’ + enter to activate safe mode – ...
Page 105
User’s manual hsg326 wireless hotspot gateway english 105 note: 4. Fast flashing means sds200w trying to connect to uplink device. 5. Constantly off for ten seconds means sds200w fails to connect to uplink device after step 4. Afterwards, status will go back to step 1. 6. Constantly on for ten secon...
Page 106
User’s manual hsg326 wireless hotspot gateway english 106 led panel understanding the led indicators there are four led indicators on the panel : power, status, lan, and wlan from left to right. Below summarizes all indication types in different states: right side panel overview t amplitude long ill...
Page 107
User’s manual hsg326 wireless hotspot gateway english 107 left side panel overview including sds200w into your network the following diagram illustrates a deployment example that shows how the sds200w can be connected to the pos printer and the 4ipnet gateway/controller. 1. Put the devices in place....
Page 108
User’s manual hsg326 wireless hotspot gateway english 108 5. Connect sds200w to your 4ipnet gateway/controller via ethernet port. Note: you need to connect to the correct lan port if your gateway/controller is operating in port-based mode. 6. To verify if the connection, press func + ‘1’ + enter to ...
Page 109
User’s manual hsg326 wireless hotspot gateway english 109 the settings of sds200w are separated into seven categories, which are 1. System – to setup the system name and device control. 2. Uplink – to determine wired / wireless relevant parameters. Any change on this page will take effect after rebo...
Page 110
User’s manual hsg326 wireless hotspot gateway english 110 main menu > users > authentication > on-demand user server configuration > on-demand account batch creation on 4ipnet controller’s wmi. Use func + enter or wait 5 seconds to clear the wrong number just pressed. Setting up sds200w with the 4ip...
Page 111
User’s manual hsg326 wireless hotspot gateway english 111 when the settings are done completely on the 4ipnet gateway/controller side, go to sds200w’s wmi and check if every uplink setting matches that on the controller..
Page 112
User’s manual hsg326 wireless hotspot gateway english 112 terminal auto setup (tas – only available on sds200w) tas refers to an automatic connection mechanism that requires no previous network settings. Just press the tas button on sds200w for three seconds, and it will automatically look for and a...
Page 113
User’s manual hsg326 wireless hotspot gateway english 113 - an image can be uploaded (such as your company logo) in tmb format if needed. - there are 2 width types, 2” for prt100 and 3” for prt200. - select the desired language for the configured ticket template. Whg supports english, french, german...
Page 114
User’s manual hsg326 wireless hotspot gateway english 114 you may start customizing your pos ticket from the window below manually typing or by inserting parameters from the drop-down list as shown in the above example. Once this is done, you may start assigning billing plans and ticket templates fo...
Page 115
User’s manual hsg326 wireless hotspot gateway english 115 the administrator can now select the desired ticket template for a specific ticket generator from the drop-down list. Applications for qr code log-in on-demand account generation with a ticket generator is a very common deployment for hotspot...
Page 116
User’s manual hsg326 wireless hotspot gateway english 116 for the utilized billing plan, the corresponding ticket template needs to be customized to support qr code. 1) the width needs to be changed to 3” (default value = 2”) 2) the parameter needs to be added by typing in “$qr” on the template, or ...
Page 117: 10.5 Creating Accounts
User’s manual hsg326 wireless hotspot gateway english 117 10.5 creating accounts configuration path: main menu >> users >> on-demand accounts >> accounts creation administrators have the option of creating single accounts or batch accounts. For potential hotspot operators who may wish to pre-generat...
Page 118
User’s manual hsg326 wireless hotspot gateway english 118 when creating custom usernames, the prefix and postfix will be kept constant while the serial number for the accounts will have single increments. The generated accounts may be downloaded for safe keeping, or sent to printer for batch printou...
Page 119: 10.6 User Self Service
User’s manual hsg326 wireless hotspot gateway english 119 10.6 user self service credit card via external payment gateway configuration path: main menu >> users >> authentication >> on-demand user >> external payment gateway hsg wireless hotspot gateway supports different types of payment gateway op...
Page 120
User’s manual hsg326 wireless hotspot gateway english 120 select the enabled billing plans that are allowed for end users to self purchase through the payment gateway. The service disclaimer can be customized by configuring web page customization. Subsequently after the configuration of your externa...
Page 121
User’s manual hsg326 wireless hotspot gateway english 121 purchase an account with a valid credit card. In order for users to get account info via sms after buying a new account online, and eliminate the risk of forgetting his/her username and password at the next time of login, administrators may c...
Page 122
User’s manual hsg326 wireless hotspot gateway english 122 the account buyers can then re-send the sms no more than the configured number. To preview your external payment portal, click “configure” for web page customization at the bottom of the page. Just like all customizable web pages in the syste...
Page 123
User’s manual hsg326 wireless hotspot gateway english 123 when a user tries to access internet from a room, the browser will show the login page with a list of available plans and service agreement. The service agreement body can be configured at the applied service zone’s custom pages settings. Use...
Page 124: 11.1 Roaming Related
User’s manual hsg326 wireless hotspot gateway english 124 chapter 11. Account roaming 11.1 roaming related roaming capability is an essential feature requirement for large scale deployments or alliance co-operation for operators who seek to provide network access for other isp subscribers to generat...
Page 125
User’s manual hsg326 wireless hotspot gateway english 125 wispr smart client: select enable if you wish to allow customers with a roaming account from a wispr agent (ipass, wifi skype, boingo, and etc.) to access your internet. Make sure to enable the https protected login field under system >> gene...
Page 126
User’s manual hsg326 wireless hotspot gateway english 126 11.3 local / on-demand account roaming out the built-in user account databases both local and on-demand of the hsg wireless hotspot gateway may be used for other controllers as their external radius authentication database. This application o...
Page 127
User’s manual hsg326 wireless hotspot gateway english 127 after enabling the roaming out feature for local or on-demand, click the radius client device settings hyperlink. The redirected page allows the administrator to specify the controller ip which is allowed to behave as a radius client and auth...
Page 128
User’s manual hsg326 wireless hotspot gateway english 128 note 1. Please make sure that the user database postfixes are configured without conflicting with one another over the two controllers..
Page 129
User’s manual hsg326 wireless hotspot gateway english 129 appendix a. Installation installation instruction preparations 1. Unpack the hsg wireless hotspot gateway and go through the package checklist. 2. Review the front panel and the back panel and identify each control and network interface that ...
Page 130
User’s manual hsg326 wireless hotspot gateway english 130 appendix b. External pages external page concept choose external page if you desire to use an external web page for your custom pages. Simply enter the url of your external webpage, click preview button to check if it is reachable, take a loo...
Page 131
User’s manual hsg326 wireless hotspot gateway english 131 the diagram below explains how external page operates using user login/logout flow as illustration: login:.
Page 132
User’s manual hsg326 wireless hotspot gateway english 132 logout: the url parameters sent by the gateway to the external login page are as follows: field value description loginurl string (url encoded) the url to be submitted when a user logs in. Remainingurl string (url encoded) the url to be submi...
Page 133
User’s manual hsg326 wireless hotspot gateway english 133 (separated by ':') client_ip ip format client ip address ipv6_addr ipv6 format client ipv6 address umac mac format (separated by ':') client mac address session string encrypted session information, includes: client ip address, mac address, d...
Page 134
User’s manual hsg326 wireless hotspot gateway english 134 an external page example that the user will see upon launching a browser is shown, and you can see the url parameters sent from the system highlighted in red: external page design variables this section displays all the url parameters that ar...
Page 135
User’s manual hsg326 wireless hotspot gateway english 135 2. Login successful page variables: field value description uid string user id (postfix is included) original_uid string original user id utype string (local, radius, ondemand, pop3, ldap, sip, nt domain) authentication server name umac mac f...
Page 136
User’s manual hsg326 wireless hotspot gateway english 136 wispr-location-id string wispr location-id attribute (only available for radius user) wispr-location-name string wispr location-name attribute (only available for radius user) wispr-billing-time string, format: hh:mm wispr billing-time attrib...
Page 137
User’s manual hsg326 wireless hotspot gateway english 137 username and password and try again. Cannot identify the policy for your account.Please contact your network administrator. User of this device (the mac address) is not allowed to use this account.Please contact your network administrator. So...
Page 138
User’s manual hsg326 wireless hotspot gateway english 138 gwip ip format gateway activated wan ip address client_ip ip format client ip address sz integer service zone id group integer group index policy integer policy index next_page string leads client to url max_uplink integer (b/s) maximum up-li...
Page 139
User’s manual hsg326 wireless hotspot gateway english 139 2. User logout path: (lan ip address or internal domain name) /loginpages/logoff.Shtml input: field required value description uid optional string user id, default is taken from cookie session optional string encoded string which contains som...
Page 140
User’s manual hsg326 wireless hotspot gateway english 140 sorry, this feature is available for on-demand user only. Sorry, this username: xxx is not found. Sorry, this username: xxx is out of quota. Sorry, this username: xxx is expired. Sorry, this username: xxx is redeemed. Value integer (sec. Or b...
Page 141
User’s manual hsg326 wireless hotspot gateway english 141 user password is incorrect invalid password format 5. Redeem (on-demand user) path: (lan ip address or internal domain name) /loginpages/redeemuserlogin.Shtml input: field required value description uid optional string current user id (if not...
Page 142
User’s manual hsg326 wireless hotspot gateway english 142 original user type and on demand user type do not match. Original user has not logged in. Redeem user logged in already. Had been redeemed before. User has run out of quota. Maximum allowable time has exceeded. Maximum allowable memory space ...
Page 143: Tools
User’s manual hsg326 wireless hotspot gateway english 143 appendix c. Useful management & evaluation tools useful management tools here are the top six open source it management products that do a solid job of replacing the big suites from hp, ibm, ca and bmc. Each offer low-cost professional servic...
Page 144
User’s manual hsg326 wireless hotspot gateway english 144 evaluation tools wireshark (for packet capturing and debug analysis) wireshark is the world's foremost network protocol analyzer. It lets you capture and interactively browse the traffic running on a computer network. It is the de facto (and ...
Page 145
User’s manual hsg326 wireless hotspot gateway english 145 appendix d. On-demand account types there are four main types of on-demand account type: usage-time (buy quota: usable time) volume (buy quota: usable traffic volume) pre-paid concept, only deducts quota while using. Account expires when ...
Page 146
User’s manual hsg326 wireless hotspot gateway english 146 volume users can access internet as long as account is valid with remaining quota and need to activate the purchased account within a given time period by logging in..
Page 147
User’s manual hsg326 wireless hotspot gateway english 147 account expires when valid period is used up or quota is depleted. Hotel cut-off time operator can set the clock time for when the account will expire. account automatically activates when it is created. unit is the number of days to ...
Page 148
User’s manual hsg326 wireless hotspot gateway english 148 duration time users can access internet while account is within valid time interval. Count down begins once account activates and expires when expiration time is reached. duration-time accounts can be further classified into: elapsed ti...
Page 149
User’s manual hsg326 wireless hotspot gateway english 149 • define explicitly the begin time and end time of the account. Account expires when the end time has been reached. cut-off time • define explicitly the clock time to “cut-off” within the day of creation..
Page 150
User’s manual hsg326 wireless hotspot gateway english 150 note 1. Since there are only 10 billing plans, if you wish to create accounts of the same type but with various quotas, this may be achieved via the unit field. Network operator is able to multiply the quota by an integer ranging from 1 to 9 ...
Page 151
User’s manual hsg326 wireless hotspot gateway english 151.
Page 152
User’s manual hsg326 wireless hotspot gateway english 152 appendix e. Ui reference index after login success, it will redirect to the main menu page. Main menu is the link that leads to all the configuration pages in the web management interface. A screenshot of the main menu is captured below, the ...
Page 153: A. System
User’s manual hsg326 wireless hotspot gateway english 153 a. System system: this section relates to system configuration. It includes, general information, wan configurations, lan ports, service zones, and etc. 1) general system name: this is a mnemonic name you can give to the controller. Once conf...
Page 154
User’s manual hsg326 wireless hotspot gateway english 154 which will be displayed on the web browser of the client in the event of internet disconnection. Https certificate: your own network certificate may be uploaded and selected here as site safety verification. User https login: presents the opt...
Page 155: 2) Wan
User’s manual hsg326 wireless hotspot gateway english 155 external ntp servers. 2) wan physical mode: select the mode (auto/1000mbps full/100mbps full/100mbps half) based on your wan connection static: this option enables the administrator to configure a static ip address on the wan interface. Appli...
Page 156: 3) Wan Traffic
User’s manual hsg326 wireless hotspot gateway english 156 3) wan traffic available bandwidth on wan interface: this section of the configuration page allows the administrator to specify uplink and downlink limitations to be enforced on the servicing wan interface. Target for detecting internet conne...
Page 157: 5) Service Zones
User’s manual hsg326 wireless hotspot gateway english 157 contrast, under "tag-based" mode, service zones will be distinguished by vlan tagging, instead of physical lan ports. 5) service zones the table will list the service zones and related settings. Click the service zone name will go to the serv...
Page 158
User’s manual hsg326 wireless hotspot gateway english 158 service zone status: each service zone can be enabled or disabled except for the default service zone. Service zone name: the name of service zone could be input here. Network interface: vlan tag (tag base only): the vlan tag number that is m...
Page 159
User’s manual hsg326 wireless hotspot gateway english 159 the ap/switch. Clients isolation (tag based): when this option is selected, unicast transmission is prevented between any clients in the same layer 2 subnet. Operation mode: contain nat mode and router mode. When nat mode is chosen, service z...
Page 160
User’s manual hsg326 wireless hotspot gateway english 160 server when clients are assigned static ip addresses. Select enable built-in dhcp server to enable the built-in dhcp server. When the built-in dhcp server is chosen, the system will act as a dhcp server and assign ip addresses to its clients....
Page 161
User’s manual hsg326 wireless hotspot gateway english 161 the alias ip of this service zone. The configurable fields are the same as dhcp server scope 1. Reserved ip address list: each service zone can reserve specific ip addresses from predefined dhcp range to prevent the system from issuing these ...
Page 162
User’s manual hsg326 wireless hotspot gateway english 162 for advance wireless configure, click vap configuration. Under security tab, system support different security type, such as, open, wep, wpa-personal and wpa-enterprise. Under advance tab, administrator can enable or disable broadcast ssid an...
Page 163
User’s manual hsg326 wireless hotspot gateway english 163 be able to associate to the network unless its receiving sensitivity meets the configured threshold. Under access control tab, administrator can restrict the total number of clients connected to the access point, as well as specify particular...
Page 164: B. Users
User’s manual hsg326 wireless hotspot gateway english 164 b. Users users: this section relates to user authentication, authorization and accounting. It includes groups configuration, internal/external authentication configuration, on- demand accounts, policies configuration, privilege lists configur...
Page 165: 2) Internal Authentication
User’s manual hsg326 wireless hotspot gateway english 165 to allow multiple devices to log in with the same account credentials, define the number here at “number of devices which are allowed to login”. Multiple device login for the on-demand authentication option can be configured at selected billi...
Page 166
User’s manual hsg326 wireless hotspot gateway english 166 the default authentication for “local” is set at authentication server 1. The user postfix is used for the system to identify which authentication option will be used for the specific user account when multiple options are concurrently in use...
Page 167
User’s manual hsg326 wireless hotspot gateway english 167 the guest authentication option is not technically a user database, but rather a specially designed option to allow a user to access and surf the network without any user account or password. This feature allows the user to associate with a p...
Page 168: 3) External Authentication
User’s manual hsg326 wireless hotspot gateway english 168 by enabling the “email denial list”, some guest email addresses which are disclaimed by certain email domain names would be blocked from internet access. By enabling “email verification”, limited free access is provided when an activation lin...
Page 169: 4) On-Demand Accounts
User’s manual hsg326 wireless hotspot gateway english 169 4) on-demand accounts account creation: administrators can choose to create a single account or multiple accounts using the "batch create" function. Before accounts can be created, at least one billing plan needs to be set up and activated. A...
Page 170: 5) Schedule
User’s manual hsg326 wireless hotspot gateway english 170 account list: all created on-demand accounts and related information are listed on this page. The list also allows administrators to manipulate on-demand accounts, such as restoring/deleting accounts and admin redeem. 5) schedule the administ...
Page 171: 6) Policies
User’s manual hsg326 wireless hotspot gateway english 171 6) policies global policy is the system's universal policy including firewall profile, specific route profile, schedule profile, and maximum concurrent sessions management which will be applied to all users unless the user has been regulated ...
Page 172: 7) Blacklists
User’s manual hsg326 wireless hotspot gateway english 172 specific route profile: the routing rules to be applied to users under this policy may be set here. Preferred dhcp pool: (defined in service zone dhcp configurations) it may be selected here as well. 7) blacklists blacklist profiles can be de...
Page 173: 9) Additional Control
User’s manual hsg326 wireless hotspot gateway english 173 9) additional control additional configurations are in this section. They are user session control, built-in radius server settings, customization, remaining time reminder, and mac acl. The administrator can control user session such as idle ...
Page 174
User’s manual hsg326 wireless hotspot gateway english 174 user session control idle timeout: configure the time base without activity to deem as idle timeout. Idle detect interval: the time interval for checking for whether the idle criteria are reached. Successive accumulation of idle intervals exc...
Page 175
User’s manual hsg326 wireless hotspot gateway english 175 charge traffic to/from host in walled garden list: for usage or volume type accounts in the on-demand user database, administrator has the option to charge or not charge visits to websites that are listed in the walled garden or walled garden...
Page 176
User’s manual hsg326 wireless hotspot gateway english 176 can set to refresh every 10/15/20 minutes to show the updated remaining quota. Mac access control list mac acl: the administrator may configure restraining measures to mac address, either mac allow or deny list..
Page 177: C. Network
User’s manual hsg326 wireless hotspot gateway english 177 c. Network network: this section is used to configure all the network settings. 1) nat the nat function supports 3 types of network address translation: dmz (demilitarized zone), public accessible server and ip/port forwarding. Demilitarized ...
Page 178
User’s manual hsg326 wireless hotspot gateway english 178 external ip address available. Internal and external ip addresses are entered as a set. After the setup, accessing the wan will be mapped to access the internal ip address. These settings will become effective immediately after clicking the a...
Page 179: 2) Monitor Ip
User’s manual hsg326 wireless hotspot gateway english 179 port & ip forwarding this function allows the administrator to set specific sets of the ip addresses at most for redirection purpose. When the user attempts to connect to a destination ip address listed here, the connection packet will be con...
Page 180
User’s manual hsg326 wireless hotspot gateway english 180 be accessed via a hyperlink of device's ip address when the system is operated under nat mode. 3) walled garden and walled garden ad this function provides certain free services for users to access the websites listed here before login and au...
Page 181: 4) Proxy Server
User’s manual hsg326 wireless hotspot gateway english 181 walled garden advertisements are advertisement links for clients to access before they are authenticated by the system. For example, guests without the network access right in hotels can still visit these sites free of charge. Click add to ad...
Page 182
User’s manual hsg326 wireless hotspot gateway english 182 placed outside the lan environment or in the internet. For example, the following diagram illustrates how a proxy server of an isp is used. Follow the following steps to complete the proxy configuration: step 1. Log into the system by using t...
Page 183
User’s manual hsg326 wireless hotspot gateway english 183 by enabling the built-in proxy server, all traffic is forwarded to the local proxy server on the controller. Using an external proxy server to specify an external proxy server, choose the option “external” and fill in the appropriate ip addre...
Page 184: 5) Local Dns Record
User’s manual hsg326 wireless hotspot gateway english 184 5) local dns record the administrator could statically assign a domain name to ip mappings for all clients connected to the hsg wireless hotspot gateway’s lan network. This feature can be used to dispatch clients to preferred ip address for c...
Page 185: 6) Ddns
User’s manual hsg326 wireless hotspot gateway english 185 6) ddns before activating this function, you must have your dynamic dns hostname registered with a dynamic dns provider. Hsg wireless hotspot gateway supports dns function to create aliases from the dynamic ip address for the wan port to a st...
Page 186: F. Utilities
User’s manual hsg326 wireless hotspot gateway english 186 f. Utilities utilities: this section provides functions for modifying accounts, backup/restore system, firmware upgrade, restart service, network utilities, and certificate. 1) administrator account this can be used to create, to edit, to rem...
Page 187
User’s manual hsg326 wireless hotspot gateway english 187 admin has authority to change his/her own password or add more accounts to the admin list to take (some of) the management responsibility. password complexity enables the admin to limit how the passwords the sub- admins use should be formed...
Page 188
User’s manual hsg326 wireless hotspot gateway english 188 1 passwords should include at least 1 form (capitalized letters/ small letters/ digits/ special characters ) 2 passwords should include at least 2 forms 3 passwords should include at least 3 forms 4 passwords should include at least 4 forms ...
Page 189
User’s manual hsg326 wireless hotspot gateway english 189 go to the generate table to create a sub-admin and define his/her authority limits. In case the administrator forgets his/her password, by entering both email and the elementary school name, the account credential will be email to the assigne...
Page 190: 2) Backup & Restore
User’s manual hsg326 wireless hotspot gateway english 190 the admin list serves as a list for admins to track the dynamics of each management accounts, i.E., the number of the online admins and the state of each sub-admin. Please note that only the created sub-admins can be deleted. Check the boxe...
Page 191
User’s manual hsg326 wireless hotspot gateway english 191 be restored. Click the backup button under general backup to save the current system configurations to a backup file on a local disk of the management console. A backup file will keep the current system settings as well as the local user acco...
Page 192: 3) Certificates
User’s manual hsg326 wireless hotspot gateway english 192 restore system settings: click browse to search for a .Db database backup file created by the controller and click restore to restore to the same settings at the time when the backup file was saved. The option of “keep wan1 setting and manage...
Page 193
User’s manual hsg326 wireless hotspot gateway english 193 system certificate this is the certificate that identifies the system. These certificates may be used for applications such as https login, capwap, and etc. The controller has a built-in factory default certificate (gateway.Example.Com) that ...
Page 194
User’s manual hsg326 wireless hotspot gateway english 194 a root ca certificate may also be uploaded with a matching private key. Internally issued certificates when an internal root ca needs to be created, internally issued certificates can be signed. The generated certificate will be listed and th...
Page 195: 4) Network Utilities
User’s manual hsg326 wireless hotspot gateway english 195 downloaded with get cert, get key in view. Trusted certificate authorities apart from self signed certificate and system’s root ca, administrators can also upload other certificates signed by other ca entities or trusted cas into the system. ...
Page 196
User’s manual hsg326 wireless hotspot gateway english 196 item description ipv4 ping: it allows administrator to detect a device using ip address or host domain name to see if it is alive or not. Trace route: it allows administrator to recover the real path of packets from the gateway to a destinati...
Page 197: 5) Restart
User’s manual hsg326 wireless hotspot gateway english 197 status when the administrator is executing any network utilities features, the status of the operation is displayed here. Result the operation result is displayed here. 5) restart click restart button to restart the system. Please wait for th...
Page 198: G. Status
User’s manual hsg326 wireless hotspot gateway english 198 ftp firmware upgrade is also an option. Enter the ftp server ip address, ftp server port, and the ftp account name and password, and lastly specify the complete firmware filename stored on the ftp server that will be used to upgrade the syste...
Page 199
User’s manual hsg326 wireless hotspot gateway english 199.
Page 200
User’s manual hsg326 wireless hotspot gateway english 200
Page 201
User’s manual hsg326 wireless hotspot gateway english 201 general system name the system name. The default name is the model number. Firmware version the present firmware version of hsg wireless hotspot gateway system up time displays for how long the system has operated. Build number the current bu...
Page 202: 2) Interface
User’s manual hsg326 wireless hotspot gateway english 202 band the band status, 2.4g, 5g or disabe report syslog server 1 the ip address and port number of the external syslog server. N/a means that it is not configured. Syslog server 2 the ip address and port number of the external syslog server. N...
Page 203
User’s manual hsg326 wireless hotspot gateway english 203 item description interface (wan) mode operating mode of this interface. Mac address the mac address of the wan1 port. Ip address the ipv4 address of the wan1 port. Subnet mask the subnet mask of the wan1 port. Service zone – default, sz1~sz4 ...
Page 204: 3) Monitor Users
User’s manual hsg326 wireless hotspot gateway english 204 3) monitor users all online users/devices will be listed here. The administrator can terminate any user session by clicking the kick out button. Non-login users will be listed here as well. Online users: successfully authenticated local users...
Page 205: 5) Logs & Reports
User’s manual hsg326 wireless hotspot gateway english 205 5) logs & reports this page is used to check the traffic history of the system which includes logs such as configuration change log, local web log, radius server log, system log and uamd log. User logs are summarized in user events, and the s...
Page 206
User’s manual hsg326 wireless hotspot gateway english 206 transactions. Radius server log: this page displays the radius messages that pass through the controller. Sip call usage: the log provides the login and logout activities of sip clients (device and soft clients) such as start time, caller, ca...
Page 207: 6) Reporting
User’s manual hsg326 wireless hotspot gateway english 207 date, system name, type, name, unit, price, total price, ip, ipv6, mac, pkts in, bytes in, pkts out, bytes out, activation time, 1st login expiration time, account valid through, remark, vlan id, group, policy, maxdnload, maxupload, reqdnload...
Page 208
User’s manual hsg326 wireless hotspot gateway english 208 5 represent the corresponding e-mail addresses configured in “smtp settings”. Click the desired e-mail address profile (1 ~ 5) and select the time interval for sending a report or log. Detail: clicking this radio button allows the configurati...
Page 209
User’s manual hsg326 wireless hotspot gateway english 209 sending logs to syslog the following log types can be sent to external syslog servers configured in “syslog settings”: local users log, on-demand users log, trial users log, roaming out users log, roaming in users log, external user log, se...
Page 210
User’s manual hsg326 wireless hotspot gateway english 210 ftp settings page: ftp destination: this specifies the ip address and port number of your ftp server. If your ftp needs authentication, enter the username and password. The “send test file” button can be used to send a test log for testing ...
Page 211
User’s manual hsg326 wireless hotspot gateway english 211 smtp server: enter the ip address of the sender’s smtp server. smtp port: by default the port number is 25. Administrator can specify other ports if the smtp server runs smtp over ssl. encryption: enable this option if your smtp server ...
Page 212: 7) Session List
User’s manual hsg326 wireless hotspot gateway english 212 syslog destinations: up to two external syslog servers may be configured. Please enter the ip address and port number of the external syslog server here. System log: this controls the enabling/disabling of the syslog logging feature. When ena...
Page 213: 8) Dhcp Lease
User’s manual hsg326 wireless hotspot gateway english 213 8) dhcp lease the dhcp ip lease information can be viewed on this page. Statistics of ip offered valid lease counts of the last 10 minutes, hours and days are shown here. The header 1 ~ 10 are the unit multipliers. For instance the number und...
Page 214: 9) Routing Table
User’s manual hsg326 wireless hotspot gateway english 214 dhcp lease list valid ip addresses issued from the dhcp server and related information of the client using this ip address is displayed here. 9) routing table the routing table lists all ipv4 route rules. The system route rules are shown here...
Page 215
User’s manual hsg326 wireless hotspot gateway english 215 policy 1~n: shows the information of the individual policy from 1 to n. Global policy: shows the information of the global policy. System: shows the information of the system administration. Destination: the destination ip address of the devi...
Page 216
User’s manual hsg326 wireless hotspot gateway english 216.