4xem E200DNWV User Manual - Step 1: Adjust View Angle
Manual is about: IP Dome Cameras
of
12
.
.
User’s manual
6
Step 2: Adjust The Focus
Loosen this screw on lens side, then
turn the lens until the most clear picture
is acquired by visual.
Tight the screw up again after the
adjustment is done
Step 1: Adjust View Angle
(zoom)
Loosen the screw on housing side,
turn the zoom adjustment ring to
the desired direction. “
T
” means to
acquire the target in far. “
W
” means
that you will see wider angle (bigger
scope)
IR LED
x 9
(light source in dark)
Light Sensor
(to turn LED on / off)
The sensor will turn IR LED on when
environment is dark (lower than 4 lux)
Day & Night Version
---
The Light Source
Vari-focus Version
--- To adjust the camera lens