4xem E200DNWV User Manual - Caution:
.
.
User’s manual
8
Caution:
If you want to mount the dome to wooden wall, make sure the wood thickness is
not less than 1/2 inch (1.3 cm).
Mount The Camera
There are two ways to mount the camera.
1.
Mount the camera on wall through camera holder (bracket)
2.
Embed the camera into ceiling
Hang The Camera on Wall with Camera Holder
(bracket)
The camera has a hole of 1/4” on the bottom cover, for camera
holder mounting application:
1.
Get the camera holder
2.
Mount the camera holder onto the desired place by following the
instructions given by the holder manual
3.
Get the camera body and mate the hole on its base to the screw on
the camera holder.
4.
Turn the screw all the way in until it stops. Keep screw a little loss until
the step 5 is finished
5.
Rotate the camera to find the best direction so that wires will not be
bended during the wiring work
6.
Tighten the screw now