4xem sku IPCAMW50 User Manual - Build A Security Application

- 28 - 

Build a security application 

The Administrator can combine options on the application page to perform many useful 

security applications. There are two 

trigger sources coming from 

attached devices such as for motion 

detection. There are also two kinds 

of actions responding to such events, 

including uploading snapshots over 

the Internet and driving other 

attached devices. To upload the 

snapshots, users can choose either 

email or FTP according to user’s 

needs. Both e-mail and FTP use the 

network settings on the network 

page. Refer to the definition section 

for detail configuration. 

1. Click on “Configuration” on 

homepage, 

2. Click on “Application” at the left 

column, 

3. Check the weekdays as you need 

and give the period of "Snapshots 

begin" time and "Snapshots end" 

time to monitor the trigger 

conditions every day, 

4. Check the “Event operation”. 

The trigger condition can be set to 

detected motion or status of the 

attached device,