4xem sku IPCAMW50 User Manual - Sequential Operation

- 43 - 

for the snapshots, before event, right upon event, and after event. The date and time 

suffix may also be added as an option. Confirm the external mail or FTP server settings 

in the network configuration. 

“Reset output” Select and save this option to reset the external device at the digital 

output to return to the original state. 

Sequential operation 

“Snapshot every second(s)” The Network Camera will send snapshots at the 

specified intervals to the external server using the method selected below. Remember: 

This operation is still subject to the conditions set in the weekly schedule.. 

“Send snapshots by email” This selects the uploading method following the 

intervals set above. The snapshot named “video.jpg” will be attached in the email with 

the subject title “Periodic snapshots”. 

“Send snapshots by FTP” The snapshots will be uploaded to the external FTP server 

with the file name defined in the next option. This can also be used to refresh the 

captured images stored in the external web server to build creative homepages. 

“FTP put snapshots with date and time suffix” This option sets up the snapshot 

capture date and time, which can be used to easily differentiate the snapshot file 

names in either the sequential or event operation. For instance, 

“video@20030102030405.jpg” means the JPEG image was captured in the year 2003, 

January the 2

nd

, at 3 o’clock, 4 minute, and 5 second. If this suffix is omitted, the file 

named “video.jpg” on the external FTP server will be refreshed at the specified interval.