P. 5rbws2 wireless stereo 900mhz speaker system user’s manual please read before using the equipment.
P. Introduction this stereo wireless speaker system applies the latest 900mhz wireless technology that enables you to enjoy music and tv sound anywhere inside or outside your home. You can simply connect the transmitter with any audio source such as ipod, tv, dvd, hi-fi and cd/mp3 player. Features 1...
P. Component identification transmitter speaker.
P. Remote control unit installation transmitter 1. Connect the supplied ac power adaptor to an electrical wall outlet. 2. Plug the ac power adaptor in the dc jack located on the rear of the transmitter. 3. The rear of the transmitter has one audio cord that can be connected to the audio output jack ...
P. Speakers 1. Insert 8 ‘c’ size alkaline batteries into the battery compartment, noting the correct polarity at the bottom of the speakers or connect the 12v power adaptor to the dc input jack on the bottom of each speaker, then plug it to a wall ac outlet..
P. ` 2. Press power button and turn the speakers on. The power/standby led will light up in blue. Remote control unit 1. Remove the battery cover at the rear of the remote control unit and insert 2 “aaa” size batteries (included) into the battery compartment, noting the correct polarity. 2. Place th...
P. Switching off 1. If there is no audio input signal to the transmitter for 4 minutes, the transmitter will go to standby mode and led will change from blue to green. 2. If the power adapter is unplugged, the led on the transmitter will turn off. 3. Speakers will turn to standby mode if there is no...
P. Distorted - press the “auto tune” button on the speakers until it matches the frequency of the transmitter. - change the position of the channel selector on the transmitter. You must then press the “auto tune” button on the speakers. - battery capacity is too low. Replace with new batteries. - en...
P. Digital audio guarantees this product for a period of 12 months from the original date of purchase. This guarantee covers repair or replacement of equipment if it proves to be faulty as a result of manufacturing faults or workmanship. No liability can be accepted for faults arising from accident ...
P..
