909 PH1000 Instruction manual - First Time User
14
First time user
If you are not familiar with chain saws and the felling
of trees, it is recommended that you obtain informed
instructions in addition to reading this manual fully. We also
recommend as a minimum that you practice cutting logs on
a saw-horse or log cradle.
General inspection
Regularly check that all the fixing screws are tight.
They may vibrate loose over time.
Power cord maintenance
If the supply cord needs replacing, the task must be carried
out by the manufacturer, the manufacturer’s agent, or an
authorised service centre in order to avoid a safety hazard.
Storage
•
Clean the electric chain saw with a dry cloth, do not use
aggressive cleaning fluids.
•
Replace the electric chain saw blade cover and store in
a dry place. Do not store in hot, dry boiler rooms or other
damp places.
If you do not intent to use the pruner for some time, e.g.
over the winter, the biodegradable chainsaw oil must be
drained from the oil tank and the oil ducts, because it will
gum. Pour remaining oil out of the oil tank and store it in
a dark, cool place. Pour a spoonful of mineral oil into the
oil tank. Spray penetrating lubricant on the chain and let
the saw run for a few moments to spread the mineral oil
through the oil pump and the oil ducts. When using the pole
saw again liberally apply chainsaw oil.
Repairs
Repairs beyond those described above, should only be
undertaken by trained personal. Should a malfunction occur
do not use the unit any further and do not attempt to repair
it yourself. Contact 909 Customer Support or have the unit
repaired by a professional.