A&D AD-8125 Instruction Manual - page 6
of
13
5
6. Thread the paper through the paper guide, fold the
paper at the label peeling bar and place the paper
on the paper take-up core.
7. Secure the paper using the paper securing fixture.
Pull the paper edge by hand so that no slack exists
in the paper.
8. Secure the print head using the head securing
fixture. If any labels remain near the print head,
remove them.
9. Turn the POWER switch on.
10. Press the FEED key several times to eject one
label.
11. Reinstall the front cover and the paper cover.
12. If the label printing position is incorrect, restart the
printer.