A&D AD-8127 Instruction Manual - page 12
10
4. PRINTING
4-1. Printing out data from the weighing device
Instructions
1. Turn the printer power on.
2. Connect the printer to the weighing device using a RS-232C or current loop cable.
3. Transmit data to the printer from the weighing device.
Refer to the instruction manual of the weighing device for the data output methods,
output format and RS-232C communication settings.
4. Press and hold the
key to feed the printer paper until the printed results can be
viewed, and then cut off the printer paper.
*
The balance has functions such as outputting by pressing the PRINT key or
automatically outputting after stabilizing the weighing.
4-2. Paper feed
Instructions
1. Press the
key to allow paper feed while the button is pressed.
4-3. Precautions
Do not print with the ink ribbon detached. Doing so may cause damage in the
printing head.
Replace the ink ribbon with a new one before it becomes worn out due to excessive
use. Failure to do so may cause damage to the printing head. Also, do not apply ink
to the ink ribbon. Doing so may cause bleeding.
Do not drop foreign matter into the printer. Doing so may cause mechanical damage
to the printer.
When operating the printer, install the printer in a stable location. Installing the
printer in an uneven or unstable location may result in movement of the printer
caused by vibration due to printing out, leading to a serious accident.
Depending on a material (PVC, etc.) of the installation table, rubber may transfer to it
from the printer. Do not set the printer on a table or sheet made of vinyl.
When cleaning the main unit, do not use organic solvents such as alcohol, thinner,
or benzine. Otherwise, that may cause damage to the printer as its main body is
made of plastic.
Keeping the ink ribbon attached to the printer a long time may result in the printer
paper becoming dirty. Also, performing continuous printing at low temperature may
result in faint printing due to characteristics of the ink.
Attempting to print when out of paper could damage the printing head. Install new
printer paper to the printer.
The ink ribbon provided at shipping is for test printing.