A&D FS-02i Instruction Manual - page 11
- 10 -
Reply O
K , + 0 0 1 0 0 0 C L
F
FS-15Ki : Target weight 1.000 kg will be set.
Set a HI limit value or upper limit weight. (No reply for F20-1.)
F07-0 or F07-1 is set, the command should have “+” and 6 digit number without
decimal point.
Command H I , + 0 0 0 2 0 0 C L
F
Decimal point follows the weight display.
Reply H
I
, + 0 0 0 2 0 0 C L
F
FS-15Ki :
F07-0:
0.200 kg will be set as an upper limit weight.
F07-1:
0.200 kg will be set as a HI limit weight.
F07-2 is set, the command should have “+” and 5 digit number without decimal
point.
Command H I , + 0 0 2 0 0 C L
F
Assume 2 decimal place number.
Reply H
I
, + 0 0 2 0 0 C L
F
2.00% will be set as HI limit %.
Set a LO limit value or lower limit weight. (No reply for F20-1.)
F07-0 or F07-1 is set, the command should have “+” and 6 digit number without
decimal point.
Command L
O , + 0 0 0 1 0 0 C L
F
Decimal point follows the weight display.
Reply L
O , + 0 0 0 1 0 0 C L
F
FS-15Ki :
F07-0:
0.100 kg will be set as a lower limit weight.
F07-1:
0.100 kg will be set as a LO limit weight.
F07-2 is set, the command should have “+” and 5 digit number without decimal
point.
Command H I , + 0 0 1 0 0 C L
F
Assume 2 decimal place number.
Reply H
I
, + 0 0 1 0 0 C L
F
1.00% will be set as LO limit %.
Store the comparator limits into the specified memory number. (No reply for F20-1.)
F07-0 is set, the command should have 2 digit memory number and 2 setting values
that have a polarity and 6 digit number without decimal point.
Command M L , 0 1 , + 0 0 1 2 0 0 , + 0 0 0 9 0 0 C L
F
Reply H
I
, 0 1 ,
+ 0 0 1 2 0 0 , + 0 0 0 9 0 0 C L
F
FS-15Ki : Store upper limit weight +1.200 kg and lower limit weight +0.900 kg into
the memory number “01”.
F07-1 is set, the command should have 2 digit memory number, target weight that
has a polarity and 6 digit number without decimal point, and HI/LO limit weight that
has “+” and 6 digit number without decimal point.