A&D LCC12T010 Instruction Manual

- 7 - 

English 

  Note   This manual is subject to change without notice at any time to improve the 

product. No part of this manual may be reproduced, transmitted, transcribed, or 

translated into any language without the prior written consent of A&D Company 

Ltd. 

  Product specifications are subject to change without any obligation on the part 

of the manufacturer. 

© 2008 

1. LCC12 Series Weigh Modules 

LCC12T010 

(Rated capacity 100 kN ) 

LCC12T020 

(Rated capacity 200 kN ) 

LCC12T030 

(Rated capacity 300 kN ) 

2. Introduction 

  The LCC12 series are stainless steel weigh modules and are composed of a 

compression load cell with a self-aligning function and mount fixtures with 

built-in anti-vibration mechanism/lift-off protection mechanism.   

  As the rated capacity range is from 100 kN to 300 kN, the LCC12 series are 

optimum for large tank scales.   

  The LCC12 series can be used in severe environments, equivalent to IP68, as 

the load cell is hermetically sealed.   

  The only required adjustment is checking the stopper units, which allows easy 

installation and maintenance. 

  Being compact and lightweight, the LCC12 series can be installed almost 

anywhere. 

  Consider the system design and installation carefully because for precision 

weighing, the load cell is more sensitive. Read this instruction manual carefully, 

for correct installation and precision weighing. 

1WMPD4000785B

1WMPD4000785B