Analog and digital systems ie 6.1 ie 6.2 owner's manual front_cover.Qxd 11/11/2002 8:37 am page 2.
Table of contents introduction 1 cautions 1 about this manual 1 keep listening, but be safe! 1 unpacking 2 placement 2 mounting instructions 2 warnings and tips 2 system configurations 3 speaker connections 4 maintenance 4 troubleshooting 4 audio adjustment 5 specifications 5 warranty information 6 ...
Unpacking these subwoofers are heavy. Rather than lifting the unit out of the shipping carton, turn the open carton over, and lift it off the subwoofer. Remove the packing corners from the subwoofer and then remove it from the plastic bag. Placement unlike high frequency sound, our ears have difficu...
System configurations the ie-series subwoofers are designed to integrate with a wide variety of full range speakers. A typical installation consists of a factory stereo system driving an external amplifier powering the ie-series subwoofer. A more advanced system utilizes separate midrange and hi fre...
Speaker connections the ie-series subwoofers have a terminal cup mounted on one end of the speaker enclosure. Connect the positive (+) wire of the amplifier to the red terminal marked (+) of the speaker enclosure. Then connect the negative (-) wire from the amplifier to the black terminal marked (-)...
Audio adjustments adjust the gain of the subwoofer amplifier to blend in with the midrange and high frequency speakers. If the amplifier powering the ie subwoofer has an electronic crossover, adjust it for the best sound quality. Typical settings are between 50-100hz. If the amplifier does not have ...
Warranty information limited two year consumer warranty directed electronics, inc. Promises to the original purchaser, to replace this product should it prove to be defective in workmanship or material under normal use, for a period of two years from the date of purchase by the dealer as indicated b...
A directed electronics, inc. All rights reserved g29000/05 09-02 front_cover.Qxd 11/11/2002 8:37 am page 1.
