A/d/s/ Jam Pack Jam Owner's Manual - page 6
audio adjustments
Adjust the gain of the subwoofer amplifier to blend in with the midrange and high frequency speakers.
If the amplifier powering the ie subwoofer has an electronic crossover, adjust it for the best sound quality.
Typical settings are between 50-100Hz. If the amplifier does not have a electronic crossover, use a 5mH
coil in series between the positive (+) amplifiers wire and the red terminal (+) of the enclosure.
1. First turn factory radio to 3/4 volume.
2. Turn up/down gain to blend with mid and high speakers.
3. Adjust crossover of amplifier for best sound.
4. Repeat steps 2 and 3 until desired sound is achieved.
specifications
dimensions
IE6.1
8”h x 12”w x 15 7/8”l
IE6.2
9”h x 14.5”w x 23.75”l
power handling
IE6.1
100 watts RMS, 200 watts peak
IE6.2
200 watts RMS, 400 watts peak
5
volume
ie_6.1_6.2.qxd 11/11/2002 8:43 AM Page 5