A&D TM-2657P Instruction Manual - page 58
48
Error code
Details
Check items
Other errors
to
Restart the power.
A power voltage error was
detected inside the monitor.
Restart the power. If the problem continues, stop
using the monitor immediately.
Restart the power.
A setting error was detected
inside the monitor.
The function settings have been initialized. Check
the settings. Restart the power. If the problem
continues, stop using the monitor immediately.
Restart the power.
A setting error was detected
inside the monitor.
The counting function has been initialized. Restart
the power. If the problem continues, stop using the
unit for the time being.
,
Restart the power.
A setting error was detected
inside the monitor.
Restart the power. If the problem continues, stop
using the monitor immediately.
Restart the power.
A memory error was detected
inside the monitor.
Restart the power. If the problem continues, stop
using the monitor immediately.
There may be a malfunction.
A font error was detected.
Restart the power. If the problem continues, stop
using the monitor immediately and request repairs.
There may be a malfunction.
A cuff error was detected.
There may be a malfunction.
A blood pressure module error
was detected.
Displaying the error status
Press the
COUNT button. The Count is displayed. Press the SELECT button within 60 seconds.
The past error codes (systolic display section), error sub codes (diastolic display section) and
the number of occurrences (pulse display section) are displayed. Each time the
SELECT button
is pressed, past error codes are displayed in numerical order.
After 60 seconds of no operation, the monitor returns to the standby mode.