A&D UA-702 Instruction Manual - Measurements

ENGLISH 7 

Measurements 

5.  When the measurement is complete, the buzzer sounds for about one second. 

The systolic pressure is displayed on the left and the diastolic is displayed on the 

right. The pulse alternates with the systolic and diastolic displays. 

6.  Press the exhaust valve button to completely release the air from the cuff. 

•  When a measurement is made with insufficient pressure, the     mark will 

appear. Re-pressurize the cuff to a pressure that is about 30 to 40 mmHg 

higher than the previous time. 

•  When a measurement is made with an erratic pulse or in a very noisy 

environment,        will appear. 

7.  Turning the power off 

Press the POWER button to turn the power off. The device will be in standby mode. 

8.  Subsequent measurements 

If a subsequent measurement is required, turn off the power and turn it on 

again. When the "0 " appears, the device is ready for another measurement. 

Note 

Allow at least ten minutes between measurements on the same person.

9.  Automatic power-off function 

If the device is left on after a measurement, it will turn off automatically after about 

three minutes. It may be turned off at any time by pressing the POWER button.