A&D UA-767 Plus Instruction Manual - Operation Mode

English  5

Operation Mode 

1. Normal Measurement With Storing Data

( Refer to page 8)

 Press 

the 

START 

button. 

Blood 

pressure is measured and data is stored 

within the device. The device can store the last thirty sets of data in 

memory automatically.   

2. Recalling The Data 

Press and hold the  START  button to recall the 

data. The stored data are automatically displayed 

in order from the last data.   

The device can store the last thirty sets of data 

in memory automatically.

3. Clearing The Data 

  Remove the batteries to clear all data. Re-install them 

again. 

4. Measurement With The Desired Systolic Pressure 

  Refer to page 9 for the measurement with a desired systolic pressure. 

Press and hold

Data number 

Stored Data 

Alternation