- DL manuals
- A&D
- Blood Pressure Monitor
- UA-789 XL
- Instruction Manual
A&D UA-789 XL Instruction Manual
Summary of UA-789 XL
Page 1
Digital blood pressure monitor model ua-789xl instruction manual original manuel d’instructions traduction manual de instrucciones traducción manuale di istruzioni traduzione bedienungsanleitung Übersetzung 使用手冊 1wmpd4001765c 翻譯.
Page 2: Contents
English 1 contents dear customers........................................................................................... 1 preliminary remarks.................................................................................... 2 precautions...........................................................
Page 3: Preliminary Remarks
English 2 preliminary remarks this device conforms to the european directive 93/42 eec for medical products. This is made evident by the mark of conformity. (0123: the reference number to the involved notified body) the device is designed for use on adults only, not newborns or infants. Environment ...
Page 4: Parts Identification
English 3 contraindications the following are precautions for proper use of the device. People who have a severe circulatory deficit in the arm must consult a doctor before using the device, to avoid medical problems. Do not self-diagnose the measurement results and start treatment by yourself. Alwa...
Page 5: Symbols
English 4 symbols symbols function / meaning recommended action standby and turn the device on. Clock button mark alarm on/off mark of the reminder if you want to stop the sound, press the start button. Sys. Systolic blood pressure in mmhg dia. Diastolic blood pressure in mmhg pul./min. Pulse per mi...
Page 6: Operation Mode
English 5 symbols function / meaning recommended action weee label refer to instruction manual/booklet sn serial number polarity of dc jack operation mode 1. Normal measurement with storing data (refer to page 10) press the start button. Blood pressure is measured and data is stored within the devic...
Page 7: Using The Monitor
English 6 using the monitor installing / changing the batteries 1. Slide the battery cover up to open it. 2. Remove the used batteries and insert new batteries into the battery compartment as shown, taking care that the polarities (+) and (-) are correct. 3. Slide the battery cover down to close it....
Page 8: Using The Monitor
English 7 using the monitor adjusting the built-in clock the device has a built-in clock. We recommend that you adjust the clock prior to use. 1. Press and hold the clock button until the digits start blinking. 2. Select the year using the start button. Press the clock button to set the current year...
Page 9: Using The Monitor
English 8 using the monitor alarm on/off mark on the display when the alarm is on, a “p” appears on the lcd. To turn the alarm off, simply press the clock button once. The alarm will sound for 1 minute. To stop the alarm sound, press the start button once. Selecting the correct cuff using the correc...
Page 10: Measurement
English 9 how to take proper measurements for the most accurate blood pressure measurement: sit comfortably on a chair. Rest your arm on the table. Do not cross your legs. Keep your feet on the floor and straighten your back. Relax before measurement . Place the center of the cuff at the same height...
Page 11: Measurements
English 10 measurements model ua-789xl is designed to detect the pulse and to inflate the cuff to a systolic pressure level automatically. If your systolic pressure is expected to exceed 230 mmhg, read "measurement with the desired systolic pressure" on the next page. Normal measurement 1. Place the...
Page 12: Measurements
English 11 measurements measurement with the desired systolic pressure if your systolic pressure is expected to exceed 230 mmhg, use this procedure. 1. Place the cuff on the arm (preferably the left arm). 2. Press and hold the start button until a number about 30 to 40 mmhg higher than your expected...
Page 13: Recalling Memory Data
English 12 recalling memory data note: this device stores the last sixty measurements in memory automatically. The data is retained as long as the batteries are in the device. When you remove the batteries or the batteries are drained, the data will be erased. 1. Press the memory button. 2. The date...
Page 14: Example:
English 13 example: moderate hypertension mild hypertension high normal who classification indicator each segment of the bar indicator corresponds to the who blood pressure classification described on the next page. About blood pressure what is blood pressure? Blood pressure is the force exerted by ...
Page 15: Who Blood Pressure
English 14 who blood pressure classification standards to assess high blood pressure, without regard to age, have been established by the world health organization (who), as shown in the chart. Blood pressure variations an individual’s blood pressure varies greatly on a daily and seasonal basis. It ...
Page 16: Troubleshooting
English 15 troubleshooting problem possible reason recommended action batteries are drained. Replace all batteries with new ones. Nothing appears on the display, even when the power is turned on. Battery terminals are not in the correct position. Reinstall the batteries with negative and positive te...
Page 17: Technical Data
English 16 technical data type ua-789xl measurement method oscillometric measurement measurement range pressure: 20 - 280 mmhg pulse: 40 - 200 beats / minute measurement accuracy pressure: ±3 mmhg pulse: ±5% power supply 4 x 1.5v batteries (r6p, lr6 or aa) or ac adapter (tb-242)(not included) number...
Page 18
English 17 accessories sold separately arm size: the circumference at the biceps. Note: specifications are subject to change without prior notice. Emc table information is listed on our website: http://www.Aandd.Jp/products/manual/medical/emc_acadapter_en.Pdf cuff catalog number cuff size arm size c...
Page 19
English 18 memo.
Page 20
Asahi 1-243, kitamoto-shi, saitama 364-8585, japan telephone: [81] (48) 593-1111 fax: [81] (48) 593-1119 a&d instruments limited unit 24/26 blacklands way, abingdon business park, abingdon, oxfordshire ox14 1dy united kingdom telephone: [44] (1235) 550420 fax: [44] (1235) 550485 a&d engineering, inc...