A&D UA-789 XL Instruction Manual - Using The Monitor
English 7
Using The Monitor
Adjusting The Built-in Clock
The device has a built-in clock.
We recommend that you adjust the clock prior to use.
1. Press and hold the
CLOCK
button until the digits start blinking.
2. Select the year using the
START
button.
Press
the
CLOCK
button to set the current year and
move to month/day selection. The date can be set
anywhere between the years 2004 and 2053.
3. Select the month using the
START
button.
Press
the
CLOCK
button to set the current month
and move to day selection.
4. Select the day using the
START
button.
Press
the
CLOCK
button to set the current day and
move to hour/minute selection.
5. Select the hour using the
START
button.
Press
the
CLOCK
button to set the current hour and
move to minute selection.
6. Select the minute using the
START
button.
Press
the
CLOCK
button to set the current minute
and activate the clock.
Setting Three Reminders
This device has 3 reminder alarms. You can set 3
different reminder alarms within a 24-hour period.
1. Press and hold the
CLOCK
button until the digits
start blinking. Then press the MEMEORY button.
“P-1” is shown at the middle line of the display.
2. Select the hour using the
START
button and press
the
CLOCK
button to set the hour and move to
minute selection. Press the
MEMORY
button to
complete the reminder setting after selecting the
minute.
3. Then the display shows “P-2” for the second
reminder. Repeat the above process if you need a
second reminder.
4. A third reminder can be set as well.
Month / day
Hour / Minute
Clock
CLOCK
button
Year
CLOCK
button
First
buzzer
Third
buzzer
MEMORY
button
Second
buzzer