A.E.B. DSX 2040 User Manual - page 11
E
n
g
lis
h
20
E
n
g
lis
h
19
1.0
INTRODUCTION
The DSX 2040 is a digital loudspeaker management system designed for the touring or
fixed sound installation markets. The absolute latest in available technology is utilized with
40-bit floating point processors and high performance 24-bit Analog Converters. The high-
bit DSP prevents noise and distortion induced by truncation errors of the commonly used
24-bit fixed-point devices. A complete set of parameters include I/O levels, delay, polarity, 8
bands of EQ per channel, 31 bands of GEQ per input, multiple crossover selections and full
function limiters. Precise frequency control is achieved with its 1 Hz resolution. Inputs and
outputs can be routed in multiple configurations to meet any requirement. The DSX 2040
can be controlled or configured in real time on the front panel or with the intuitive PC GUI
accessed via the RS-232 or USB interface. Software upgrade for CPU and DSP via PC
keeps the device current with newly developed algorithms and functions once available.
Multiple setup storage and system security complete this professional package.
Shipped contents:
- DSX 2040 Unit
- User Manual
- XConsole Software CD
- Power Cord
2.0
FEATURES
- 2 Inputs and 4 Outputs with flexible routing
- 40-bit floating point DSP
- 96kHz Sampling Rate
- High Performance 24-bit A/D Converters
- 1 Hz Frequency Resolution
- 8 Equalizers (Magnitude or Phase) for each Input and Output
- 31 Bands GEQ for each Input
- Multiple Crossover types with Full Function Limiters
- Precise Level, Polarity and Delay
- CPU and DSP upgrade via PC
- Individual Channel Buttons with Linking capability
- 2-Line x 16 Character Backlit LCD Display
- Full 5-segment LED's on every Input and Output
- Storage of up to 30 Preset Setups
- Security Lock
- USB and RS232 Interface for PC Control and Configuration
1.
USB - a standard Type B USB connector. Device driver from the provided software
CD must be installed prior to usage.
2.
RS232 - a standard female DB9 socket. A straight through cable is required for PC
connection.
3.
Mute (Channel Menu) Buttons - Mute or un-mute input and output channels. When
an input channel is muted, a red LED will come on for indication.
When the <