E
n
g
lis
h
21
E
n
g
lis
h
22
4.0
REAR PANEL FUNCTIONS
1.
Main Power - Connects via a standard IEC socket. A compatible power cord is supplied
with the unit. The voltage input is 90-240VAC, 50-60Hz.
2.
Main Fuse - T2.5A-250V. Slow blow type.
3.
Power switch - Controls power On/Off.
4.
Analog Inputs and Outputs - XLR connectors are provided for each audio input and
output. The device's output stage employs the balanced impedance topology. All I/O
connectors have pin 1 as ground (shield), pin 2 as + and pin 3 as -.
5.0
POWERING UP THE DEVICE
·
After powering up the unit, the following initialization screen is displayed on the LCD:
·
The initialization process takes several seconds and during that period the unit boots
and displays the device model and firmware version.
·
After the initialization process is finished the DSX 2040 displays its main screen:
·
The screen shows the current program number and program name assigned to the
unit. If the program number is 31 and the name is MEMORY, it means that no
program is assigned, the last data before previous power down is recalled instead.
·
Now the DSX 2040 is ready to operate.
6.0
OPERATING THE CHANNEL MENUS
Channel Linking - While holding down the <