Ipc3 1.3 mega-pixel / multi-profile ip camera ver. 1.0
2 quick installation guide table of contents 1. System requirements ......................................................................................................... 3 2. Physical installation.......................................................................................................
About multi-profile multi-profile stands for simultaneously video streams. These network cameras can generate h.264, mpeg4 and mjpeg streaming simultaneously to different clients. Moreover, the resolution can be different from one client to another. This state-of-art design is considerable to fit in...
2. Physical installation 2.1 ip camera connectors dc power jack lan socket factory default reset audio output jack lan socket please use category 5 “straight through” cable to connect the network camera to a 100mbps fast ethernet network switch or hub or poe injector. Audio output jack audio-out jac...
2. Place the camera on the table or fix it onto ceiling or wall use three screws to fix the network camera onto the ceiling or wall. You could also put the network camera on the table directly. Fixed it by screws 3. Plug an ethernet cable into the camera connect an ethernet cable to the lan socket l...
3. Ip camera administration when you have installed your networked device over your network environment, to start network camera web configuration, you must have the web browsers installed on computer for web management. - microsoft internet explorer 6.0 or higher - mozilla firefox 3.5 or higher at ...
Note 1: if no ip address is assigned within 30 seconds, the networked device will automatically assign 192.168.0.100. User may now open your web browser, and key in http://192.168.0.100 in the address bar of you web browser to logon network camera’s web configuration page. Note 2: power line frequen...
