A-Link v100 Quick Installation Manual - page 2
Connection/explain of connectors
1.
Connect phone cable from VDSL2 -line to modem VDSL -port.
2.
Connect network cable from computer (network card), VOIP -device (example ATA) and/or IPTV -device
to modem LAN -ports.
3
Reset – button, where modem can be reset to factory defaults.
4. Connect power supply to modem Power -port.
5. Turn power on using this switch.
Installation requirements:
- Place modem to horizontal and flat base
- Keep modem away from heating device
- Do not keep modem in dusty or wet place
Frontpanel led’s/functions:
POWER:
ONLINE:
- ON = power on
- ON = Internet connection is activated
- OFF = power off
- OFF = Internet connection is not activated
VDSL LINK:
LAN1 – LAN4:
- ON = VDSL2 line connected
- ON = network connection is activated
- Flashing = no VDSL2 connection / connecting
- OFF = network connection is not activated
-
Flashing
=
data
in
LAN
VDSL TX/RX:
- ON = VDSL2 line connected
- OFF = no VDSL2 connection
- Flashing = data in VDSL2 line
Reset to factory defaults:
Factory defaults can be reset when you press reset button back of the modem about 10 seconds when modem have
power on.
2