1. DL manuals
  2. A-Neu Video
  3. Matrix Switcher
  4. HD-88K
  5. Instruction Manual

A-Neu Video HD-88K Instruction Manual

Summary of HD-88K

  • Page 1

    Audio / video manufacturer hd-88k 8x8 uhd 4k2k hdmi matrix switch v1.1 instruction m anual a-neuvideo.Com frisco, texas 75034 (317) 456-2461.

  • Page 2

    Safety information 1. To ensure the best results from this product, please read this manual and all other documentation before operating your equipment. Retain all documentation for future reference. 2. Follow all instructions printed on unit chassis for proper operation. 3. To reduce the risk of fi...

  • Page 3

    Table of contents a neu video 1 contents package contents ...............................................................1 introduction & features ....................................................2 specifications ........................................................................3 front pane...

  • Page 4

    2 introduction & features introduction the hd-88k is a professional 8x8 matrix routing switch. Supporting (8) hdmi inputs and (8) hdmi outputs. The hd-88k is based on hdmi standards and supports full resolution hdmi video with embedded hdcp and a signal bandwidth of 340mhz, so there is no signal deg...

  • Page 5

    3 specifications specifications • type of switcher: (8) inputs to (8) outputs hdmi matrix switch • hdmi support: hdmi 4k2k, 1080p@60hz, h36-bit deep color, 3d of hdmi v1.4 formats • hdcp / cec support: hdcp 1.3 compliant, cec compliant • video bandwidth: double data rates: 340mhz, total 6.75gbps ban...

  • Page 6

    4 front panel front panel q power switch: the power switch turns the unit on and off. The led will illuminate red to indicate that the switcher is on and is receiving power. The switcher will remember that last state during a power cycle. When power is removed and resorted, the last configuration wi...

  • Page 7

    5 front panel front panel - edid, memory & recall o function key - edid: used to display change current edid mode. - press edid to select new edid mode or select - press source row #1 or #2 select edid modes. - press enter to ready memory location. - or press edid again to cancel operation. Operatio...

  • Page 8

    6 front panel front panel - all, off, lock & enter d function key - all: disables (mutes) video on all destinations or selects the same source to all destinations. Option 1 - press all followed by off button. The display will show “ 0 “ indicating all destinations have no video selected. Option 2 - ...

  • Page 9

    7 rear panel rear panel a neu video q dc power inlet: the switcher is fitted with a dc power plug input connector. Ensure that the plug used is of an approved type and is of sufficient current carrying connector capacity with the correct voltage and connector polarity. 12volt dc power supply 5a max ...

  • Page 10

    8 typical application installing diagram samples connection: using external ir, rs-232 or ethernet commands to control the hd-88k via pc or hd-100 ir receiver transmit the hd-88k’s ir signal. Note: 1. Switcher ir external port : use hd-100 ir signal receiver. 2. 4k2k source: use 4k2k blu-ray hd sour...

  • Page 11

    9 remote control before making any connections to the switcher. Observe the following: • ensure the mains voltage supply matches the label on the supplied plug-pack (+/- 10%) • ensure that the power switch is off • ensure that all system grounds (earth) are connected to a common point. • avoid power...

  • Page 12

    10 remote control ir remote custom and data codes (nec standard) how to setup ir codes : model number : hd-88k custom code : 8a75 all: 8a75 b04f power on: 8a75 a15e off: 8a75 b14e power off: 8a75 a25d edid: 8a75 b748 lock: 8a75 b54a recall: 8a75 b24d memory: 8a75 b44b enter: 8a75 b34c press destinat...

  • Page 13

    11 edid function edid function for hdmi matrix switcher edid setup to change the edid setup step 1. Press the edid button the display will show the currently selected edid mode step 2. Press source #1 or #2 button row the button will flash blue and the display will show the current embedded edid sta...

  • Page 14

    12 edid function edid function : 7x embedded edid modes mode 1. Fss ® (fast speed start) fast speed start ® mode shortens the startup time of the switcher. Selecting this mode does not force the edid setup to be cancelled. Users may first select one edid mode from mode 2 to 3, and then select mode 1...

  • Page 15

    13 edid function edid learning mode learning edid single to single example : learn destination #8 edid to source #5. Step 1. Press the edid button the button will flash blue and the display will show the current embedded edid status. Step 2. Press the destination #8 button row copy the destination #...

  • Page 16

    14 edid function edid single learning mode 1 learning edid mode-#1 learning edid from destination to source single learning mode#1 edid setup key press sequence: edid > destination # > source # > enter the edid for hdmi has been learned from the destination port to the source port. Press edid > dest...

  • Page 17

    15 edid function edid single learning mode 2 learning edid #2 passing edid from destination to source multiple learning mode #2 edid setup key press sequence: edid > off > destination #1 thru #8 > enter the edid for hdmi has been learned from the destination port to the source port. 1. Press edid bu...

  • Page 18

    Note: the external ir jack has voltage on the “ring” portion of a 3-conductor plug. You must use a 3-conductor plug (aka: stereo plug). Using a 2-conductor plug will short out the power supply. Always make connections with the switcher power off. *** when you plug the external ir extender into the s...

  • Page 19

    17 a neu video ethernet & rs-232 serial interface ethernet / rs-232 serial interface connects a pc or control system version compatible v2.0 for a complete list of commands, please reference external document extended ethernet protocol instruction manual. Example of the commanded string to select in...

  • Page 20

    End of document 18 terms and conditions of use please read the following terms and conditions carefully before using this hardware, components and software provided by, through or under a-neuvideo, inc (collectively, the “product”). By using installing or using the product, you unconditionally signi...